Register Now

Drivelayer · 11-28-2016, 08:22 AM

Good morning all,

Can anyone give any feedback on the axon gov for governor for Nitro use, specifically what sensor can I use? I currently havean align sensor in place, can I change the end of that sensor and use it with the Axon? If so does anybody know the wiring scheme to use?

jczankl · 11-28-2016, 09:28 AM

Yes you Can.

When you solder on a new lead, RED to RED, BLACK TO BLACK, SIGNAL TO SIGNAL.

Drivelayer · 11-28-2016, 10:01 AM

great, got my Axon today and i cannot wait to put it in my 700N

jczankl · 11-28-2016, 10:34 AM

Please read my Gov Description post. If you have any questions please let me know.

Drivelayer · 11-28-2016, 12:05 PM

Thanks, I've been following it. seems like most of the threads relating to gov usage are with electrics.

Dawiev · 11-28-2016, 08:58 PM

If it is HE50H22 that you are referring to, red and black are reversed, if you want to use a standard servo plug and port.

Drivelayer · 12-20-2016, 04:17 PM

Dawiev,
Are you saying with this sensor I should wire red to black, black to red and not just match the colors?

Dawiev · 12-20-2016, 09:03 PM

If you look at the white JST plug on the sensor you will see the black is in the middle and red on the side. Align reversed the polarity.

Your choice. Solder it color for color and remember to plug it in different, or reverse the solder so it "looks right" in the servo plug.

Black is pwr and Red is gnd.

11-28-2016, 08:22 AM	#1 (permalink)
Drivelayer Registered Users Join Date: Jan 2012	Axon gov on nitro, sensor Good morning all, Can anyone give any feedback on the axon gov for governor for Nitro use, specifically what sensor can I use? I currently havean align sensor in place, can I change the end of that sensor and use it with the Axon? If so does anybody know the wiring scheme to use?

11-28-2016, 09:28 AM	#2 (permalink)
jczankl Registered Users Join Date: Oct 2004	Yes you Can. When you solder on a new lead, RED to RED, BLACK TO BLACK, SIGNAL TO SIGNAL. __________________ JC Zankl Heli-Professional/YS Engines/Futaba USA/1st Blades/Scorpion Power Systems/Bavarian Demon/Xpert Servos/AeroPanda/ThunderPower RC

11-28-2016, 10:01 AM	#3 (permalink)
Drivelayer Registered Users Thread Starter Join Date: Jan 2012	Axon great, got my Axon today and i cannot wait to put it in my 700N

11-28-2016, 10:34 AM	#4 (permalink)
jczankl Registered Users Join Date: Oct 2004	Please read my Gov Description post. If you have any questions please let me know. __________________ JC Zankl Heli-Professional/YS Engines/Futaba USA/1st Blades/Scorpion Power Systems/Bavarian Demon/Xpert Servos/AeroPanda/ThunderPower RC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-28-2016, 12:05 PM	#5 (permalink)
Drivelayer Registered Users Thread Starter Join Date: Jan 2012	Thanks, I've been following it. seems like most of the threads relating to gov usage are with electrics.

11-28-2016, 08:58 PM	#6 (permalink)
Dawiev Registered Users Join Date: Jul 2013 Location: Middle East	If it is HE50H22 that you are referring to, red and black are reversed, if you want to use a standard servo plug and port.

12-20-2016, 04:17 PM	#7 (permalink)
Drivelayer Registered Users Thread Starter Join Date: Jan 2012	Dawiev, Are you saying with this sensor I should wire red to black, black to red and not just match the colors?

12-20-2016, 09:03 PM	#8 (permalink)
Dawiev Registered Users Join Date: Jul 2013 Location: Middle East	If you look at the white JST plug on the sensor you will see the black is in the middle and red on the side. Align reversed the polarity. Your choice. Solder it color for color and remember to plug it in different, or reverse the solder so it "looks right" in the servo plug. Black is pwr and Red is gnd.

Register Now

Log-in