Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Mikado Logo Helicopters


Mikado Logo Helicopters Mikado Logo Helicopters Discussion


Reply
 
Thread Tools Display Modes
Old 07-04-2012, 04:33 AM   #1
mahbouni
Registered Users
 

Join Date: Jan 2007
Location: London
Default Logo 400SE Motor Options

I would prefer to use the Mod .7 main gear. Could I use any of these motors I have spare?

1. Pyro 600-09, 900KV, 5mm shaft

2. Scorpion HK3226-880, 880KV, 5mm shaft
__________________
Logo 700 - JR Forza 700 - Logo 600 - Logo 550SX - Logo 480 - LA Sniper2 - Protos - Mini Protos
mahbouni is online now        Reply With Quote
Old 07-04-2012, 05:47 PM   #2
Jays200
Registered Users
 
Posts: 617
 

Join Date: Dec 2008
Location: Perth, Western Australia
Default

Mahbouni,

EDIT - Sorry, had a re:read and noticed you already have the 600-9 motor. Not sure what the 17T mod 0.7 pinion options are in 5mm.

I have been thinking about this too but can't decide on the 600-9 (930kV) or 600-11(1050kV).

The 5mm shaft on the Pyro 600 is the older, original shaft and it now comes with a 6mm shaft. Mikado parts (now discontinued I believe) are MIK 4044 6mm 16T mod 0.7 and MIK 4045 6mm 17T mod 0.7. I actually had a 600-9 and MIK 4045 in my hands but the motor was old 2010 stock with the 5mm shaft so I returned it.

My Pyro 20-08 (1400kV) is doing a good job with a 12T mod 0.7 but the 600 sounds attractive at 2kW vs 1kW for the 20-08/400 motor.

Is the 600 going to do it easier?

Am I going to get longer flight times with the same flying style?

Is the 600-11 going to be comparable with the factory 400SE 1050kV Scorpion motor 200T/22T mod 0.5 vs 138T/16T or 17T mod 0.7 or am I better off with the 600-9?

Looking forward to the responses.

I'm not considering anything other than Kontronik so that narrows it down.

Cheers.

Jayson
__________________
Regards, Jayson
Logo 700/800Xx Silverline, Pyro 850-40L, Kosmik 200, 14S, 157 & 256 @ 8v
Logo 400SE Silverline, Pyro 600-09, Jive 80+HV, 8S, 9660A+ 8900G @ 6v
Jays200 is offline        Reply With Quote
Old 07-05-2012, 02:42 AM   #3
mahbouni
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2007
Location: London
Default

Yes I have one of the very first Pyro 600-09 with the 5mm shaft. The 5mm shaft is now discontinued. I believe some people were snapping it in a crash.

So you're saying that Mikado have discontinued the 6mm pinions? Genious decision

Anyways, I've been playing with MrMel's headspeed calculator and this is what I got

Number of cells: 6s
Main gear tooth count: 138T
Pinion tooth count: 20T
Motor KV: 900
Governor used: Jazz/Jive mode 4
Extended result
ATV adjusted

Result for calculation:
Estimated lowest voltage during flight: 20,46
Lowest RPM (due to voltage and efficiency) : 2401

Throttle 60%: 2401
Throttle 65%: 2475
Throttle 70%: 2549
Throttle 75%: 2623
Throttle 80%: 2698
Throttle 85%: 2772
Throttle 90%: 2846
Throttle 95%: 2920
__________________
Logo 700 - JR Forza 700 - Logo 600 - Logo 550SX - Logo 480 - LA Sniper2 - Protos - Mini Protos
mahbouni is online now        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Mikado Logo Helicopters


Mikado Logo Helicopters Mikado Logo Helicopters Discussion

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com