TREX 250 RELEASED !!!

[t-driver]

my Gaui 200 also flew right out of the box. (did a motor upgrade later)

as for wich will fly better,
i think they are too similar to make a big difference.
it's like asking what flyes better, a rex v2 or a copterX v2 ....
so it will come down to weight,boom lenght,and blade size...which isn't final on the rex-250.

[Tom Burgess]

T-rex250 test fly (4 min 15 sec)

[sonofcar]

Originally Posted by brgsstm

http://uk.youtube.com/watch?v=0iTH_gp-Zrc

sweet

[CeeveeSiN]

Originally Posted by jujiro

I'm going to say the T-rex 250, Not just because its a T-rex or from align, but because it's coming from it being newer in design. I'm pretty sure they were listening to all the problems that the Gaui 200 users were having as well. Not to mention that Gaui didn't really do much for their 200 until the sjm 180, Gaui 200 and the T-rex 250 threatened to take the entire market and now they decide to work on a v2 .

I mean honestly that's just what happens to old designs, just look at the T-rex 450 . While it is still a great heli, there are newer models that offer superior performance to it Like the G5, Beam E4 and Furion

V2 Gaui 200 gonna eat the Trex250... the amount of tech in the V2 puts the little rex back in the stoneage..
not to mention the V2 FBL..

[felborn]

Originally Posted by CeeveeSiN

V2 Gaui 200 gonna eat the Trex250... the amount of tech in the V2 puts the little rex back in the stoneage..
not to mention the V2 FBL..

The Trex250 is hardly the first helicopter to come from Align. I would be surprised if the Gaui would surpass the Trex250, but noone knows for sure until both are shipped and experienced. Personaly I like the fact that the Trex is a weee bit bigger, think that will help on the overall experience and feel.

[s0laris]

its like the size of a blade CP.. not that small..

not small enough to really fly indoors..

[Scotty T]

Blade CP


Yea buy one and upgrade the $hit out of it until it's really no longer a blade cp.

Then it will fly nice.

Waste of money.

[s0laris]

I didnt say blade cp was an option.. Just comparing sizes..

[Scotty T]

I know, i'm just spreading my bitterness towards my first heli purchase and mistake.

No offense to you.

[HilliHeli]

Originally Posted by Scotty T

Blade CP


Yea buy one and upgrade the $hit out of it until it's really no longer a blade cp.

Then it will fly nice.

Waste of money.

I know what you mean, with all the CNC parts that are available it's very tempting to keep putting (or dumping) $ into one.

[asdf1234]

you guys all seem to be forgetting about the GAUI 100ep!!!

[iflymyhelishigh]

It isn't much smaller than the 200...

[s0laris]

that new walkera is much smaller the 4g3 or soemthing like that


http://www.heliguy.com/Forum/walkera...cs-t16404.html

A 200 class cannot really be flown inside a house.

even the 4g3 is *iffy*

[The Steve-O]

I read a review of the Firefox 100, has anyone flown that?

[dizzymarkus]

Have some reading about the FF100: Have fun!!

http://www.rcgroups.com/forums/showthread.php?t=826436

Markus

[ssp711]

Originally Posted by invertsick

Check out guyz,
The 250 is on it's way!

Bob I think it's time for a 250 forum

serge

It is great helicopter, and I found a HK site is selling at 10% off.

http://www.rc-fever.com/align-helico...314.html?ref=1

[eightythree]

Originally Posted by s0laris

that new walkera is much smaller the 4g3 or soemthing like that


http://www.heliguy.com/Forum/walkera...cs-t16404.html

A 200 class cannot really be flown inside a house.

even the 4g3 is *iffy*

wow a collective palm size.. any more info on this one?

[s0laris]

I have no more info.

the Gaui 200 EP has a New V2 that is also just released.. a bit smaller than Align 250 and parts are cheap cheap cheap.

So many options.. what to do !

[Gr4yb3ard]

So many helis, so little time!

The EP 100 is primarily plastic, as was the <original> Walkera 4#3.

Some people have gotten them flying, but with caveats on the setup problems.

I spent a lot of time trying to get a plastic 4#3 running with little success. I have, though seen a metal head version of the 4#3 fly pretty well.

So, I'd take a look at the 4g3 if it ever comes out, even pounce on one if it's a metal head version.

But for now, the Gaui-200 is a proven, respected heli, and while the Align 250 is the new kid on the block, there's not much doubt it's a winner. And of course we have the mCX being the real contender for indoor (though not 3d) flying.

At least you will know that you can get one of these flying!

***yb3ard