START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
JR and Spektrum Radios and Electronics JR and Spektrum Radios, Gyros, Servos, Etc. |
|
LinkBack | Thread Tools | Display Modes |
07-03-2015, 01:26 PM | #1 (permalink) |
Registered Users
Join Date: Aug 2013
|
DX9 Switch NKK M-2013L/L
Hey guys,
I broke one of my switches on my DX9 and ordered a M2013 NKK switch from Digikey and it works... But the threads on the collar are a different pitch than the stock switch The original switch is stamped M-2013 L/L and it's an NKK switch. The only matching switch I can find online is the M2023LL1W01 and that's all wrong. I really don't want to send this damn thing to Horizon, and I really don't want to use an alternative switch. I intend to sell this thing once I have it back together and want it to be correct for who ever buys it. Any advice would be greatly appreciated. |
Sponsored Links | |||
Advertisement |
|
07-04-2015, 08:50 PM | #2 (permalink) |
Registered Users
Join Date: Jan 2012
|
Is yours the short two position switch? If so, you can use this as a replacement. You need to keep your old collar because a new one is not included. But the old one does fit. I have used these Futaba replacement switches on a DX6I and DX9. The toggle looks and feels exactly the same.
|
07-06-2015, 10:48 PM | #3 (permalink) |
Registered Users
Join Date: Jun 2008
|
Switches A,H - NKK M2012E4S4W01
Switches B,C,F,G - NKK M2013ES4W01 Switches D,E - NKK M2013Q4S4W01
__________________
Too many helis & Too many planks Lots of DX radios & A couple Futaba 72mhz radios AMA member & Full scale plank driver HELIFREAK !!! |
Thread Tools | |
Display Modes | |
|
|