Register Now

tmodelli · 08-01-2012, 04:09 PM

Hello,

I have a quick question. I'm building my next Electric machine (a Goblin), and want to put a Glyphon SBEC into it. Since it will probably be runninng 12Sm the 7075 seems the right optionl, correct?

How about a buffer pack? I haven't found any documentation on this,and it would be the only deal breaker for me, as I couldn't fly a $2K+ machine knowing that the BEC is the only power source to the electronics (ouch).

Thanks for your support,

--T

rdarby777 · 08-02-2012, 03:48 PM

According to fabien you can use a buffer pack as long as the output voltage on the bec is exactly the same as the buffer pack. He told me for HV servos to run the bec at 7.9v-8v and keep the 2s lipo buffer at the same voltage. Im still awaiting some final details on this setup from him before I proceed but you will love the bec it performs great and I have the flag pin as well as the LV Led which is by far the brightest LED i have ever seen.

I like the bec option for the consistant voltage so I would def recommend going this route. I would wait for his reply or send a pm just to make sure I didnt miss anything though as I am just repeating what he told me. Hope this helps.

Fabien · 08-06-2012, 06:54 PM

Hi,

i will make a small schematic + manual update for buffer pack usage during the week, i'll post the new manuals links here,

best regards,

fabien

tmodelli · 08-06-2012, 07:07 PM

Awesome.

I had a buffer pack in the Logo, but some BECs don't support it, as it looks like induced voltage and it shuts down.

basilio · 08-19-2012, 01:01 AM

Quote:

Originally Posted by Fabien

Hi,

i will make a small schematic + manual update for buffer pack usage during the week, i'll post the new manuals links here,

best regards,

fabien

I didn't know this was possible. This was the only thing that kept me from using another BEC than the Kontronik built-in BEC.
Is the new manual available yet?

velocity90 · 10-07-2012, 05:11 PM

So it has been 2 months and no schematics

basilio · 10-08-2012, 12:59 PM

I believe Fabien isn't involved with Gryphon anymore. Or maybe he even left the rc hobby all together.
Which is actually a pity. I guess someone grew a life beyond rc heli's

caralmar · 10-27-2012, 10:08 AM

Get a Scorpion Backup Guard. I put one on my Rush and tested it on the ground. It kept my electronics alive when I unplugged main BEC.

basilio · 10-28-2012, 03:07 AM

Thanks caralmar. I might just do that.

08-01-2012, 04:09 PM	#1 (permalink)
tmodelli Registered Users My HF Map location Join Date: Mar 2009	Bec question Hello, I have a quick question. I'm building my next Electric machine (a Goblin), and want to put a Glyphon SBEC into it. Since it will probably be runninng 12Sm the 7075 seems the right optionl, correct? How about a buffer pack? I haven't found any documentation on this,and it would be the only deal breaker for me, as I couldn't fly a $2K+ machine knowing that the BEC is the only power source to the electronics (ouch). Thanks for your support, --T __________________ SAB Goblin - Scorpion HKIII 4035-560 21t + HW 120HV + HW RPM Sensor, DS8717+BL980 HV, SAB 630, VBAR 5.3P! 600SX - Hacker A50-12L Turnado + PowerJive 120HV @ 12S, BLS253+BLA256HV, SAB 630, VBAR 5.3P!

08-06-2012, 07:07 PM	#4 (permalink)
tmodelli Registered Users Thread Starter My HF Map location Join Date: Mar 2009	Awesome. I had a buffer pack in the Logo, but some BECs don't support it, as it looks like induced voltage and it shuts down. __________________ SAB Goblin - Scorpion HKIII 4035-560 21t + HW 120HV + HW RPM Sensor, DS8717+BL980 HV, SAB 630, VBAR 5.3P! 600SX - Hacker A50-12L Turnado + PowerJive 120HV @ 12S, BLS253+BLA256HV, SAB 630, VBAR 5.3P!

10-07-2012, 05:11 PM	#6 (permalink)
velocity90 Registered Users Join Date: Aug 2010	So it has been 2 months and no schematics __________________ -TT E700 V2-vbar-mks950-980-Kosmik 160HV-Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+Spirit Pro

10-27-2012, 10:08 AM	#8 (permalink)
caralmar Registered Users Join Date: Aug 2009	Get a Scorpion Backup Guard. I put one on my Rush and tested it on the ground. It kept my electronics alive when I unplugged main BEC. __________________ Rush 700 * Trex 700N x 2 * Trex 600Pro * Goblin 570 * 450L Dominator - V-Bar on all AMA #934662

10-28-2012, 03:07 AM	#9 (permalink)
basilio Registered Users Join Date: Aug 2011	Thanks caralmar. I might just do that. __________________ Goblin 500 \| Goblin 700 \| Logo 500SE

08-02-2012, 03:48 PM	#2 (permalink)
rdarby777 Registered Users Join Date: Jan 2012	According to fabien you can use a buffer pack as long as the output voltage on the bec is exactly the same as the buffer pack. He told me for HV servos to run the bec at 7.9v-8v and keep the 2s lipo buffer at the same voltage. Im still awaiting some final details on this setup from him before I proceed but you will love the bec it performs great and I have the flag pin as well as the LV Led which is by far the brightest LED i have ever seen. I like the bec option for the consistant voltage so I would def recommend going this route. I would wait for his reply or send a pm just to make sure I didnt miss anything though as I am just repeating what he told me. Hope this helps.

08-06-2012, 06:54 PM	#3 (permalink)
Fabien Registered Users Join Date: Feb 2006	Hi, i will make a small schematic + manual update for buffer pack usage during the week, i'll post the new manuals links here, best regards, fabien

10-08-2012, 12:59 PM	#7 (permalink)
basilio Registered Users Join Date: Aug 2011	I believe Fabien isn't involved with Gryphon anymore. Or maybe he even left the rc hobby all together. Which is actually a pity. I guess someone grew a life beyond rc heli's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in