START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Flight Stabilization Flight Stabilization |
|
LinkBack | Thread Tools | Display Modes |
04-23-2012, 01:58 PM | #1 (permalink) |
Registered Users
Join Date: Oct 2010
|
Tail wag and FM gryo
I have been ironing out BUGS on my exi 450p seems my head speed was to low and it was occleating.So now im using the simple GOV mode on my castle ice50lite and have set a 0-45-65-65-65 th on tx i have tried 70 and 75 percent curv as well
now im getting a good head speed but i have fast tail wag. I take off and dail out the wag but it doesnt stop untill 2 clicks from RATE mode =52percent Even then i will get a shudder type wag if i hit the rudder and let off untill it catches back up. when my head speed was not correct and my pitch curve was messed up the tail worked fine! any ideas ? thanks Bob |
Sponsored Links | |||
Advertisement |
|
04-23-2012, 03:16 PM | #2 (permalink) | |
Registered Users
Join Date: Mar 2008
|
Quote:
If the above is ok then move the servo ball closer to the servo shaft to shorten the arm length and make it less sensative. |
|
04-23-2012, 03:38 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2010
|
well it was working perfect before i got the head speed set corect . i am set on the next to longest hole now is it common to be even farther in that that ? it is a futaba tail servo
Bob |
05-17-2012, 01:59 PM | #5 (permalink) |
Registered Users
Join Date: Feb 2007
|
I'd generally agree with setting up in rate mode first. This isn't always the case as I know there are some gyros that require you to center your tail first to get equal throw...done in HH mode.
what servo/gyro?
__________________
X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910 |
Thread Tools | |
Display Modes | |
|
|