Register Now

HammerHead · 06-13-2010, 05:36 PM

I just swaped out the Tx/Rx that came with my raptor 30 rtf. to my Spectrum DX6I and a new Rx.
Have everything set up close enough to get me started except for a real twithchy tail servo.
Any ideas?

755 robert · 06-13-2010, 05:49 PM

Gyro gain too high???

HammerHead · 06-13-2010, 06:03 PM

No.
Turned it down from 80% all the way to 30% still the same.

755 robert · 06-13-2010, 06:15 PM

If the only change is the tx-rx it has got to be a setting in the tx travel or something like that or a loose wire from the change over...just thinking out loud here..

HammerHead · 06-13-2010, 06:38 PM

I did notice that it goes from HL rate mode at 56% gain. Weird number for the change over.
Going to play around with the settings a bit. Maybe get lucky and trip over it.
This thing is bumming me out.
Nothing but greif since i opened the box

755 robert · 06-13-2010, 06:40 PM

What tx-rx did you have before?

HammerHead · 06-13-2010, 06:47 PM

An Ace TS6I Tx/Rx combo that came with the heli.
I was just looking around the Ace Hobby forums.
Another guy had the same issue I am having with a Futaba set-up.
Ace told him to call them that they seemed to think it is a gyro set up issue??
I dont know about that.
I will give them a buzz tomorrow when I get home from work if I cant get it sorted out till then.

755 robert · 06-13-2010, 06:50 PM

Post the solution if you get one ,,nothing like reading a good book only to find the last page gone

HammerHead · 06-13-2010, 06:57 PM

I have a gut feeling that the solution to this problem wont be the end of the story...
More like the end of the intro to "War and Peace"

HammerHead · 06-14-2010, 09:36 PM

So far Ace is doing the duck and weave on the forums.
I will try and nail them down with a phone call tomorrow afternoon.

06-13-2010, 05:36 PM	#1 (permalink)
HammerHead Registered Users My HF Map location Join Date: Jul 2007	Twitchy Tail Servo I just swaped out the Tx/Rx that came with my raptor 30 rtf. to my Spectrum DX6I and a new Rx. Have everything set up close enough to get me started except for a real twithchy tail servo. Any ideas?

06-13-2010, 05:49 PM	#2 (permalink)
755 robert Registered Users Join Date: Feb 2010	Gyro gain too high??? __________________ 700 class nitro,2X 600class electric,2X 450class,250 class,130 class,a few mcpx class().Dx-7.All helis fbl...If I had a dollar for every dollar I've spent on heli's ...I would break even. .Who is John Galt?

06-13-2010, 06:15 PM	#4 (permalink)
755 robert Registered Users Join Date: Feb 2010	If the only change is the tx-rx it has got to be a setting in the tx travel or something like that or a loose wire from the change over...just thinking out loud here.. __________________ 700 class nitro,2X 600class electric,2X 450class,250 class,130 class,a few mcpx class().Dx-7.All helis fbl...If I had a dollar for every dollar I've spent on heli's ...I would break even. .Who is John Galt?

06-13-2010, 06:40 PM	#6 (permalink)
755 robert Registered Users Join Date: Feb 2010	What tx-rx did you have before? __________________ 700 class nitro,2X 600class electric,2X 450class,250 class,130 class,a few mcpx class().Dx-7.All helis fbl...If I had a dollar for every dollar I've spent on heli's ...I would break even. .Who is John Galt?

06-13-2010, 06:50 PM	#8 (permalink)
755 robert Registered Users Join Date: Feb 2010	Post the solution if you get one ,,nothing like reading a good book only to find the last page gone __________________ 700 class nitro,2X 600class electric,2X 450class,250 class,130 class,a few mcpx class().Dx-7.All helis fbl...If I had a dollar for every dollar I've spent on heli's ...I would break even. .Who is John Galt?

06-13-2010, 06:03 PM	#3 (permalink)
HammerHead Registered Users Thread Starter My HF Map location Join Date: Jul 2007	No. Turned it down from 80% all the way to 30% still the same.

06-13-2010, 06:38 PM	#5 (permalink)
HammerHead Registered Users Thread Starter My HF Map location Join Date: Jul 2007	I did notice that it goes from HL rate mode at 56% gain. Weird number for the change over. Going to play around with the settings a bit. Maybe get lucky and trip over it. This thing is bumming me out. Nothing but greif since i opened the box

06-13-2010, 06:47 PM	#7 (permalink)
HammerHead Registered Users Thread Starter My HF Map location Join Date: Jul 2007	An Ace TS6I Tx/Rx combo that came with the heli. I was just looking around the Ace Hobby forums. Another guy had the same issue I am having with a Futaba set-up. Ace told him to call them that they seemed to think it is a gyro set up issue?? I dont know about that. I will give them a buzz tomorrow when I get home from work if I cant get it sorted out till then.

06-13-2010, 06:57 PM	#9 (permalink)
HammerHead Registered Users Thread Starter My HF Map location Join Date: Jul 2007	I have a gut feeling that the solution to this problem wont be the end of the story... More like the end of the intro to "War and Peace"

06-14-2010, 09:36 PM	#10 (permalink)
HammerHead Registered Users Thread Starter My HF Map location Join Date: Jul 2007	So far Ace is doing the duck and weave on the forums. I will try and nail them down with a phone call tomorrow afternoon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in