Register Now

74ranch · 07-10-2014, 05:37 PM

Just converted to RNFBL, I have Futaba CGY750, with my 14Sg radio. I'm using ProModeler servos S74140DL-HV on the cyclics. The servos seem real mushy, I have them set in the 750 at 285hz. The PM servos say they are 330hz. Is this causing my mushy/sluggish servo action. Sure would like some help. Been flying it in FB mode, and I have an TT550 electric w/CGY750 and I like it a lot. It is not at all sluggish like this thats what made think the servos. Hope someone can prove me wrong.

tealc · 07-10-2014, 07:22 PM

When setting up the CGY750, what flight mode did you set up. 5 and 4 really slow things down. I have mine set at 3 currently and have been thinking of go to 2 to see/feel the difference.

74ranch · 07-10-2014, 08:48 PM

I'm set at 3, I really think I chose the wrong servo, think I will save them for a plane.think I will call John tomorrow and order the 245BLHV.

flyingquisinart · 07-11-2014, 10:16 AM

Mushy in flight or on the bench? If you are new to FBL servo response is different on the bench than in the air.

Matt

74ranch · 07-11-2014, 06:39 PM

Yea, I figuring that out the hard way, hell getting old.

flyingquisinart · 07-11-2014, 08:24 PM

Quote:

Originally Posted by 74ranch

Yea, I figuring that out the hard way, hell getting old.

I look at it this way. When I reached a certain age, I found to put new things in my brain, I have to make a choice... Either something has to go out of my brain, to get the new thing in, or I just don't want to spend the time and energy to bother. My kid shows me his video and computer games, but I don't have room in my head, nor do I want to spend my time.

74ranch · 07-14-2014, 02:42 PM

Bingo! I have been fighting getting the swash direction with this 750, I gotta be brain dead. I think tonight I'm going to sit down, drink a beer and see if I can get this thing to work. the whole Ail/Elv/Pit just keeps meshing with me.

07-10-2014, 05:37 PM	#1 (permalink)
74ranch Registered Users Join Date: Dec 2013 Location: Va.	Setup help please! Just converted to RNFBL, I have Futaba CGY750, with my 14Sg radio. I'm using ProModeler servos S74140DL-HV on the cyclics. The servos seem real mushy, I have them set in the 750 at 285hz. The PM servos say they are 330hz. Is this causing my mushy/sluggish servo action. Sure would like some help. Been flying it in FB mode, and I have an TT550 electric w/CGY750 and I like it a lot. It is not at all sluggish like this thats what made think the servos. Hope someone can prove me wrong.

07-10-2014, 07:22 PM	#2 (permalink)
tealc Registered Users Join Date: Jun 2010	What flight mode When setting up the CGY750, what flight mode did you set up. 5 and 4 really slow things down. I have mine set at 3 currently and have been thinking of go to 2 to see/feel the difference.

07-11-2014, 10:16 AM	#4 (permalink)
flyingquisinart Registered Users Join Date: Mar 2006	Re: Setup help please! Mushy in flight or on the bench? If you are new to FBL servo response is different on the bench than in the air. Matt __________________ Matt Pantera P5 50 RNFBL, Blade 130X, mcpx, Gaui X5 FES

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-2014, 08:48 PM	#3 (permalink)
74ranch Registered Users Thread Starter Join Date: Dec 2013 Location: Va.	I'm set at 3, I really think I chose the wrong servo, think I will save them for a plane.think I will call John tomorrow and order the 245BLHV.

07-11-2014, 06:39 PM	#5 (permalink)
74ranch Registered Users Thread Starter Join Date: Dec 2013 Location: Va.	Yea, I figuring that out the hard way, hell getting old.

07-14-2014, 02:42 PM	#7 (permalink)
74ranch Registered Users Thread Starter Join Date: Dec 2013 Location: Va.	Bingo! I have been fighting getting the swash direction with this 750, I gotta be brain dead. I think tonight I'm going to sit down, drink a beer and see if I can get this thing to work. the whole Ail/Elv/Pit just keeps meshing with me.

Register Now

Log-in