Register Now

Konahover · 06-19-2014, 11:18 PM

Hi can you please help, I can't seem to get my programming card to operate from my ESC. I just ordered a Programming card (version 3) and when I plug it into my older YGE160HV esc, I cant get any led's on the card to make programming changes. I have tried powering the yge with multiple charged Lipo batteries with no luck, so i tried to power the card alone with a small receiver pack and the card lights up normally..
Any help would be greatly appreciated.

Here is the ESC, I'm not sure what version it is but maybe you can help?

newbheliusr · 06-19-2014, 11:53 PM

Use the short lead. And make sure you press the enter button after making your selection.

I can call you if you need more personal help.

Rex

Sent from my iPhone using Tapatalk

Konahover · 06-20-2014, 12:23 AM

Thanks so much! I will try that and get right back to you..

Konahover · 06-20-2014, 09:48 PM

Thanks for the support Newbheliusr!!
Top notch. I ended up figuring out the problem after all by reconnecting to the YGE multiple times and suddenly it was working and I was able to program the throttle.

Thank you!

newbheliusr · 06-21-2014, 02:55 AM

Well that is indeed good news. I really hope you are able to get it working.

If it's not to much trouble. I'd love to see a pic of that plane.

Glad to have (tried) to help.

Rex

Sent from my iPhone using Tapatalk

06-19-2014, 11:18 PM	#1 (permalink)
Konahover Registered Users Join Date: Apr 2013	YGE160HV Prog card compatibilty ? Hi can you please help, I can't seem to get my programming card to operate from my ESC. I just ordered a Programming card (version 3) and when I plug it into my older YGE160HV esc, I cant get any led's on the card to make programming changes. I have tried powering the yge with multiple charged Lipo batteries with no luck, so i tried to power the card alone with a small receiver pack and the card lights up normally.. Any help would be greatly appreciated. Here is the ESC, I'm not sure what version it is but maybe you can help? Attached Thumbnails

06-19-2014, 11:53 PM	#2 (permalink)
newbheliusr Registered Users Join Date: Apr 2011	YGE160HV Prog card compatibilty ? Use the short lead. And make sure you press the enter button after making your selection. I can call you if you need more personal help. Rex Sent from my iPhone using Tapatalk __________________ Heli's I have: Goblin 500 (Vbar Neo), Gaui X5(Vbar Neo), X7(Vbar Neo), Innova 600 Night heli (Vbar Neo Vbar Vcontrol I'm the not so newbheliusr as I have been here a while. But I like this name.

06-21-2014, 02:55 AM	#5 (permalink)
newbheliusr Registered Users Join Date: Apr 2011	YGE160HV Prog card compatibilty ? Well that is indeed good news. I really hope you are able to get it working. If it's not to much trouble. I'd love to see a pic of that plane. Glad to have (tried) to help. Rex Sent from my iPhone using Tapatalk __________________ Heli's I have: Goblin 500 (Vbar Neo), Gaui X5(Vbar Neo), X7(Vbar Neo), Innova 600 Night heli (Vbar Neo Vbar Vcontrol I'm the not so newbheliusr as I have been here a while. But I like this name.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-20-2014, 12:23 AM	#3 (permalink)
Konahover Registered Users Thread Starter Join Date: Apr 2013	Thanks so much! I will try that and get right back to you..

06-20-2014, 09:48 PM	#4 (permalink)
Konahover Registered Users Thread Starter Join Date: Apr 2013	Thanks for the support Newbheliusr!! Top notch. I ended up figuring out the problem after all by reconnecting to the YGE multiple times and suddenly it was working and I was able to program the throttle. Thank you!

Register Now

Log-in