START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
120 SR Blade (eFlite) 120 SR Helicopters Information and Help |
|
LinkBack | Thread Tools | Display Modes |
05-06-2015, 05:51 AM | #1 (permalink) |
Registered Users
Join Date: May 2015
|
newbie question
I am very new to this hobby and would like to know if yall could help me. Since being new I went with a used Heli. I recieved my blade 120 on monday. Charded all the batteries and started playing with the controls last night. It seems likethe servo push rod is stuck in the up position. I can tell it has been crased before. up on trying to take off it will go to the left and fall over. I took off the canopy and the right servo push rod is moving up and down but the left is stuck in the upright postion. I am assuming that I will need a new servo just trying to make sure before going into a hobby shop with some questions. Thanks for your help.
|
Sponsored Links | |||
Advertisement |
|
05-06-2015, 12:31 PM | #2 (permalink) |
Registered Users
Join Date: Mar 2010
|
Check the little white gears on the bottom of the offending servo and check for dirt or bad tooth.
__________________
Syma S107-Syma S109-Syma X8C-Syma X8G-Syma X5HC-Syma X5HW-Mini Orion-ProtoX-Syma X5C-1 USAF RETIRED 1968-1988 Vietnam Veteran |
05-06-2015, 12:47 PM | #3 (permalink) |
Registered Users
Join Date: Mar 2011
|
Could just be unplugged some of my micro's have had the plugs work out a little and stop moving. Still looks like they're plugged in they're just up enough to break the connection.
__________________
__________ Goblin 380, 500, 570, Mikado 690SX, 480Xx(Stretched 500) , Protos Mini, Max V2 , Oxy 3, Vbar Control/Neo Vlink (Citizen 758)YouTubeProgress:http://tinyurl.com/oliver1071 |
05-06-2015, 03:50 PM | #4 (permalink) |
Registered Users
Join Date: Mar 2010
|
There are no plugs on the servos on the 120sr. The wires are soldered!
__________________
Syma S107-Syma S109-Syma X8C-Syma X8G-Syma X5HC-Syma X5HW-Mini Orion-ProtoX-Syma X5C-1 USAF RETIRED 1968-1988 Vietnam Veteran Last edited by Pfloyd; 05-06-2015 at 05:22 PM.. |
05-06-2015, 05:19 PM | #5 (permalink) |
Registered Users
Join Date: Mar 2011
|
Wow that's strange
__________________
__________ Goblin 380, 500, 570, Mikado 690SX, 480Xx(Stretched 500) , Protos Mini, Max V2 , Oxy 3, Vbar Control/Neo Vlink (Citizen 758)YouTubeProgress:http://tinyurl.com/oliver1071 |
05-07-2015, 12:05 PM | #6 (permalink) |
Registered Users
Thread Starter
Join Date: May 2015
|
The gears move fine. looks like all connections are there. when moving the gears on the right one it moves the bar up and down. On the left it does not move. but when to told to move on the controller they do not spin like the right. thanks for all y'alls help.
|
Thread Tools | |
Display Modes | |
|
|