How to change the Elev. Cyclic Servo?

[adelmasw]

My elevator cyclic servo quit and HH is sending me a new one. So do you have to take the frames apart to get this in? What is the best way to replace it? Or is it just going to be a big PITA to do it?

[lovespicyfood]

I've heard you have to split the frame

[merch@nt]

Yup you have to split the frame.

[adelmasw]

Thanks for the info. I was afraid of that....

Sent from my DROID RAZR using Tapatalk 2

[chuck-o]

And don't forget to put the pushrod back on the servo before you screw the frame back together.

[Mentalic]

Originally Posted by lovespicyfood

I've heard you have to split the frame

+1

Just cleaned all my servos feedback pots last night and yes its a pita!
Remove the gear, pull off the canopy mount on the screw side of the frames, remove the frame screws. It can be done without unplugging all the servos if your carefull.

[NCcraig]

Originally Posted by adelmasw

Thanks for the info. I was afraid of that....

Sent from my DROID RAZR using Tapatalk 2

What are you afraid of?

[Chris Gardill]

Originally Posted by chuck-o

And don't forget to put the pushrod back on the servo before you screw the frame back together.

This is timeless advice.


Sent from my iPad using Tapatalk HD