alarm output

[asterix86]

On the JLog 2.6, is there a socket where the alarm can be seen? I mean an output that goes high or low when there is an alarm.

I want to have the same features as powerlog 6S:
log V, I, Temp (if I can log other sensors that's nice), configure alarm for V, I, Temp, and have an output to know when there is an alarm

Is it ok with Jlog 2.6?

[dl7uae]

Of course it is ok with JLog2.6.

You can define several alarm thresholds like on battery voltage, mAh, ESC FET temperature, BEC temperature, BEC voltage drop, up to three temperatures from "JLog-own" sensors (higher/lower than), speed stall/max, alarms from our cell pack monitor CVS16, etc etc

Alarms:
- given out to telemetry
- logged
- additionally two alarm lines are definable (just pins on JLog, low-active). Line #1 can serve different pulsing schemes: "switch", "pulse", "flash", "Morse"