raptor noob questions!!!!!!! help again sorry guys

[cruzroy]

as you all know i got a rappy 30 v2, that im slowly getting it setup, and im waiting for a radio i can use and fuel, but i just got a used align 2 IN 1 and a align starter....just got it today....YEAH!....but i noticed that the battery for the 2 IN 1 and starter dont have standard (or the balance charger i have) balance leads.....????? I cant plug them in to charge them....what do i do???? thanks to everyone....if everything works out i will have a test flight i 2 weeks....

[Suburban92]

what charger do you have and what batteries are they

[kevinl7778]

Also a photo of the battery connectors may help.

Also I will be in waltham ma for work the last week of june if you still need help. (You have to do most of the driving though)

[guitarherowanab]

a picture would help. from what i gather, there are four types of balance taps that most batteries fall into. there are charts on a website somewhere, but i cant remember what website. i think thy are thunderpower type, jst-xh, polyquest/hyperion type, and then some other off brand batteries. what charger are you using?

if they are align batteries, then you need the jst-xh balance board for your charger.

[johnbs8]

you can also arrange the wires in the balance lead to work on other brand boards. i know its been discussed here or RR. maybe do a search if it sounds interesting enuff to ya.

[cruzroy]

i have a 450 , and the 2200 batteries i use charge on my imax b6 charger but the balance leads on the align batteries are different.....???? but later tonight i will post some pics.....thanks guys..

[guitarherowanab]

here is a link that tells you what batteries have the same balance leads. these part numbers are for hyperion chargers, so i dont know if they will work with your charger.

http://www.allerc.com/hyperion-multi-adapter-balance-harness-2s-6s-xh-p-3159.html

the relavent letters for the types of taps are XH(jst-xh), HP(hyperion), TP(thunderpower), and EH(? not very common) as you can see, you need the jst-xh type for your align batteries. if you get a picture up of your other batts, hopefully we will be able to tell what balance taps it has.

what brand of battery are you using in the raptor?

also, take a picture of the balance board that came with your charger and where the cable plugs into it.

[cruzroy]

this is a photo of my dillema i have the type of charger that charges the 2 on the left...from 1s to 6s, i dont have a board....its built into the b6 charger...the 1 on the right was in the align starter....and it has some kind of clip that i quess it holds it in place....the battery looks new and it has a charge know but if i use it ,i got no way to charge it......IS THERE A ADAPTER!.....thanks guys hope this helps..

[Suburban92]

cut the plug off solder new one on FIX.T

[cruzroy]

the wire are differt colors....i wouldnt know where to start
the lipo i got is black yellow green red
the one i need has orange blue white black

?????????????????????????

[kevinl7778]

Are you using a three cell lipo on the rce-b6t? It should be a two cell.

[600bob]

It's probably a TP, Thunder Power connector. I have a couple of batteries that use it. Adapters can be found here.

http://epbuddy.com/index.php?main_pa...bseaaqgj9j29h4