 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| Hirobo Nitro Helicopters Hirobo Freya Evo Eagle Helicopters Discussion |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
07-09-2014, 05:28 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Oct 2011
|
RJX FBL Head on Sceadu 50
 Just ordered the CCMP kit for my old Sceadu 50. Got a AR7200BX on the shelf. Just wondering what head to use. Does anyone know if the 50 sized RJX head on HobbyKing will work on here? |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
07-11-2014, 07:12 AM
|
#2 (permalink) |
|
Registered Users
Join Date: Mar 2008
|
yes it will. i believe you just have to enlarge the hole for the jesus bolts a little. that's what we had to do on an sdx
 |
|
|
|
|
07-11-2014, 09:12 PM
|
#3 (permalink) |
|
Registered Users
Thread Starter
Join Date: Oct 2011
|
Thanks!!
 Thanks, Ordered it last night. What are you running for Cyclic servos?? |
|
|
|
|
07-12-2014, 08:33 PM
|
#4 (permalink) |
|
Registered Users
Thread Starter
Join Date: Oct 2011
|
CCMP or SWM
Ron Lund delivered today. Got all the old parts off and the new one on. Need to start mounting and setting up the servos. I have 3 brand new Hitec 5645MG. They were for my Wild Hare Edge 540v2. They are digital but very slow. Not sure they will work for FBL.
|
|
|
|
|
07-19-2014, 10:15 PM
|
#5 (permalink) |
|
Registered Users
Join Date: Jun 2011
|
I have one setup with a align head.
Depending on your flying style the hitecs should be fine I did end up.putting my fly bar head back on ..... Dave |
|
|
|
|
07-20-2014, 07:22 AM
|
#6 (permalink) |
|
Registered Users
Join Date: Mar 2008
|
Running bls 253's and a guy i know uses DS610's
|
|
|
|
|
07-23-2014, 11:39 PM
|
#7 (permalink) |
|
Registered Users
Thread Starter
Join Date: Oct 2011
|
RJX
 Hobby King delivered today!!!! Also got some DS615 for the cyclic. Almost ready to start putting it together!! |
|
|
|
|
09-27-2014, 11:27 PM
|
#8 (permalink) |
|
Registered Users
Thread Starter
Join Date: Oct 2011
|
Getting There
 |
|
|
|
|
10-25-2014, 09:11 PM
|
#9 (permalink) |
|
Registered Users
Join Date: May 2009
|
Nice head. I just bought one for my sdx50
__________________
What componants you install and your flying skills is what make a good flying heli. |
|
|
|
|
10-26-2014, 10:11 AM
|
#10 (permalink) |
|
Registered Users
Thread Starter
Join Date: Oct 2011
|
RJX Head
Thanks, we've been going through harvest, so I haven't had any play time. But I hope to get back to it soon.
|
|
|
|
|
10-26-2014, 04:54 PM
|
#11 (permalink) |
|
Registered Users
Join Date: May 2009
|
Oh and a Vbar. . . . . .so this will give me something to do over the coming xmas break. Currently doing my Hurricane 550, so my sdx50 will be the last of my fleet if 6 to FBL.
Hope you do get time to play. . . . . . . 
__________________
What componants you install and your flying skills is what make a good flying heli. |
|
|
|
|
11-15-2014, 09:26 PM
|
#12 (permalink) |
|
Registered Users
Join Date: May 2009
|
How sexy is this LOL!
Installed and flight tested to hover. Had to enlarge the holes where the Jesus bolts go through the head block to suit the stock SDX bolts for the main shaft. I have to re think the swash as there is so much binding happening. I'm going to swap around the pivot bolts from the upper swash and outer swash plate but need spares as there is only 3 outer swashplate pivot bolts vs 4 upper wash pivot bolts. This will position the washout and main links closer to the upper swashplate to hopefully reduce binding. Will see.
__________________
What componants you install and your flying skills is what make a good flying heli. Last edited by masjo; 11-16-2014 at 05:03 PM.. Reason: Added info |
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
