Register Now

marcelino · 01-09-2007, 09:32 AM

Nice flying!
Nice tailfin! :glasses2:

would it be ok to say: looower :wink:

Marcel

cbdane · 01-15-2007, 01:46 AM

Quote:

Originally Posted by staplegun

Flying and Freezing is the theme today.

http://worleybird.com/fly/freezefly.wmv

Cool! I linked to your video through Finless' reply so hadn't seen your location. I immediately recognized the terrain and thought "That must be right near WSMR!" Sure enough, the shot of the club sign at the end confirmed it. I spent quite a bit of time with some projects out at HELSTF some years back.

tcast305 · 01-22-2007, 09:41 PM

Here is a video I shot this pass Sunday (1-21-07) at the local AMA field here (Markham Park). The pilot who flew my heli is Elvis Leslie. He flys for Carbon Extreme. I had to edit out the end due to my camera work (its only a couple more seconds).

Here is my setup:

Trex 600 with custom heli 2mm carbon frame
Zpower Z50a-800 motor with 14T pinion
CC 85HV running GOV mode 2100rpm
FP EVO 10s (2x5s) 3700mah packs
Futaba 611 gyro
Hitec 6975 servos for cyclic
600mm Vblades and 95mm vblades for tail
Align torque tube

There are 2 versions of the video one in High Def and one in lower res.

This one is in HD (1280x720) and its 86mb.
http://www.rchelivideo.com/trex_600_...HD_1-21-07.wmv

This one is in lower res (640x480) and its 25mb.
http://www.rchelivideo.com/trex_600_...am_1-21-07.wmv

Enjoy, Thanks.

Leon Luke · 01-29-2007, 02:31 AM

Took my 600 up north.

http://www.leonluke.com/videos/Trex600Arcticjan2807.wmv

Leon Luke

Ticidytoc · 02-01-2007, 02:15 PM

Thought I would add this here also.

A video I shot the other weekend testing a new frame while pilot 'X' has some fun with it.

Flightpower 8s 3700 brick
Neu 1910/1Y
Kontronik Jazz 55
Spektrum DX7

Enjoy!

http://mattrc.com/video/trex/rotorworkz-proto-8s.wmv

Finless · 02-01-2007, 11:44 PM

About damn time Matt

I was wondering when those frames were going to show up

Tell the B... that he gets better EVERY time I see him fly! MAN he is now very close to Ian's flying... HOLY SMOKES that rocked! I AM impressed!

Anyway nice vid man... Where was that location?

Bob

abcdefg0 · 02-02-2007, 12:08 AM

Hi!

Here is a Video of my T Rex 600 made in the swiss alps.

http://www.hang.brainstyle.ch/nicolas/trex.avi

bullaculla · 02-08-2007, 03:35 AM

Wow! great video. I really like the poofs of sand/dust when it gets close to the tarmac! Good stuff Matt. :mrgreen:

Quote:

Originally Posted by Ticidytoc

Thought I would add this here also.

A video I shot the other weekend testing a new frame while pilot 'X' has some fun with it.

Flightpower 8s 3700 brick
Neu 1910/1Y
Kontronik Jazz 55
Spektrum DX7

Enjoy!

http://rchelipilot.net/video/trex600...z-proto-8s.wmv

cudaboy_71 · 02-18-2007, 06:35 PM

woohoo! maiden this morning.

sorry, nothing exciting in the video. 10mb of dum-di-dum.....the two packs i had were new. so, just some hovering about to break them in. but, BOY was she smooth. i was seriously chomping at the bit to wind her up and put the sticks to her. patience...patience.....

http://www.hotheli.com/misc/021807T600Maiden.mov

Bryan R · 02-22-2007, 06:13 PM

Trex 600 Vegas 2007 Bryan Regular (3 min 59 sec)

Bryan R

kraaijer · 02-26-2007, 02:46 PM

I just got a Trex 600 :-)

Practicing those auto's on the sim already with the 600 on Phoenix.

First is just a regular auto. Second is inverted :glasses2:

Autorotation Trex600 in Phoenix (0 min 29 sec)

Phoenix sim TRex600 Inverted auto (0 min 26 sec)

Ron

motohead74 · 03-01-2007, 02:46 PM

WOW i can honestly say i don't like you guys anymore

:mrgreen: JK JK these vids just show how minuscule i am when it comes to flying heli's if i can fly even 1/3 as good as some of you guys i will be happy :mrgreen:

keep them cool vids coming!!

fogger · 03-15-2007, 11:42 AM

Hey guys,

I took a new video yesterday and put together another quick on-board movie.

There are some new maneuvers I've been working on, so let me know what you think

Foggers 10s Trex 600 Onboard Flight #2 (7 min 45 sec)

-Fog

cudaboy_71 · 03-15-2007, 08:40 PM

very smooth fogger. nice.

Finless · 03-15-2007, 11:47 PM

fogger

That is without a doubt the BEST onboard video I have seen yet!

Sickle and Eibert say 5 THUMBS !!!UP

A+ on the music
A+ on the routine!
A+ shooting an auto at the end!
A+ on the camera mounting

I love it man! FREAKIN AWESOME JOB and in fact I am going to post a link to it in the video forum!

Bob

Finless · 03-16-2007, 12:03 AM

Chris... I just watched that again and MAN I love it! FREAK man... I cant tell you how much I enjoyed the RIDE! The music fit perfect too...

I did post your link in the HF video forum too...

Nice job... BEST onboard I have seen yet man.

Bob

fogger · 03-16-2007, 01:19 AM

Wow, really nice compliment, thanks Bob.

In case anyone is interested I took a couple quick shots of the camera setup. You'll crack up at how cheap and simple it is. I was amazed at the video quality from such an inexpensive (~$120) point and shoot digital camera

. It takes 640x480 video at 30FPS, about 15 minutes worth on a 1GB card.

The mount is just half of the plastic box my metal grips came in, cut open on one edge so I can hit the camera shutter button. I mounted the box to the frame with 3M "dual-lock" velcro, then used regular velcro to hold in the camera, and finally added the outer battery strap for good measure. Seems to hold on there for dear life, and is quickly attachable/removable.

Thanks again for the nice feedback,

-Fog

bullaculla · 03-16-2007, 01:51 AM

Real nice foggy! beautiful auto! motivation to hit the sim.
:mrgreen:

Finless · 03-16-2007, 03:14 AM

GOD Fogger... simplicity at it's best!

I love it!

Bob

cbdane · 03-16-2007, 10:31 AM

Quote:

Originally Posted by fogger

Hey guys,

I took a new video yesterday and put together another quick on-board movie.

There are some new maneuvers I've been working on, so let me know what you think

http://www.youtube.com/watch?v=f-Oe8m_5S6M

-Fog

Beautiful!! In answer to your question at the end, "I thoroughly enjoyed the ride!!"

Now a technical question: Was your one-way was stuck on your auto at the end? It sure seems like I could still hear the motor cogging as the rotor slowed down on the ground. I've been worried about practicing autos lately because of sticky one-way problems.

01-22-2007, 09:41 PM	#43 (permalink)
tcast305 Registered Users Join Date: May 2006	Trex 600 on 10s Z50a motor Here is a video I shot this pass Sunday (1-21-07) at the local AMA field here (Markham Park). The pilot who flew my heli is Elvis Leslie. He flys for Carbon Extreme. I had to edit out the end due to my camera work (its only a couple more seconds). Here is my setup: Trex 600 with custom heli 2mm carbon frame Zpower Z50a-800 motor with 14T pinion CC 85HV running GOV mode 2100rpm FP EVO 10s (2x5s) 3700mah packs Futaba 611 gyro Hitec 6975 servos for cyclic 600mm Vblades and 95mm vblades for tail Align torque tube There are 2 versions of the video one in High Def and one in lower res. This one is in HD (1280x720) and its 86mb. http://www.rchelivideo.com/trex_600_...HD_1-21-07.wmv This one is in lower res (640x480) and its 25mb. http://www.rchelivideo.com/trex_600_...am_1-21-07.wmv Enjoy, Thanks.

01-29-2007, 02:31 AM	#44 (permalink)
Leon Luke Registered Users Join Date: Oct 2004	Trex600 in the arctic Leon Luke Took my 600 up north. http://www.leonluke.com/videos/Trex600Arcticjan2807.wmv Leon Luke __________________ Representing: Team A Main , Mikado V-Team, Team Xpert, Team Synergy, Team KDE, Team Cool Power, Team Hatori, Team Protek, Eco Power Lipos, TruGlow, XFC 2006/7/8/11

02-01-2007, 02:15 PM	#45 (permalink)
Ticidytoc Registered Users My HF Map location Join Date: Aug 2006 Location: Earth	Thought I would add this here also. A video I shot the other weekend testing a new frame while pilot 'X' has some fun with it. Flightpower 8s 3700 brick Neu 1910/1Y Kontronik Jazz 55 Spektrum DX7 Enjoy! http://mattrc.com/video/trex/rotorworkz-proto-8s.wmv __________________ A Helicopter, Brushless Motor, Esc, Battery, Servos, RX Last edited by Ticidytoc; 03-23-2008 at 11:37 PM.. Reason: update link

02-01-2007, 11:44 PM	#46 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	About damn time Matt I was wondering when those frames were going to show up Tell the B... that he gets better EVERY time I see him fly! MAN he is now very close to Ian's flying... HOLY SMOKES that rocked! I AM impressed! Anyway nice vid man... Where was that location? Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

02-18-2007, 06:35 PM	#49 (permalink)
cudaboy_71 Registered Users My HF Map location Join Date: Jun 2005	woohoo! maiden this morning. sorry, nothing exciting in the video. 10mb of dum-di-dum.....the two packs i had were new. so, just some hovering about to break them in. but, BOY was she smooth. i was seriously chomping at the bit to wind her up and put the sticks to her. patience...patience..... http://www.hotheli.com/misc/021807T600Maiden.mov __________________ ˙ʇı ʞɐǝɹq 'ǝʞoɹq ʇ,uıɐ ʇı ɟı

01-09-2007, 09:32 AM	#41 (permalink)
marcelino Join Date: Nov 2005	Nice flying! Nice tailfin! :glasses2: would it be ok to say: looower :wink: Marcel

02-02-2007, 12:08 AM	#47 (permalink)
abcdefg0 Join Date: Jul 2006	Hi! Here is a Video of my T Rex 600 made in the swiss alps. http://www.hang.brainstyle.ch/nicolas/trex.avi

03-01-2007, 02:46 PM	#52 (permalink)
motohead74 Registered Users Join Date: Feb 2007	WOW i can honestly say i don't like you guys anymore :mrgreen: JK JK these vids just show how minuscule i am when it comes to flying heli's if i can fly even 1/3 as good as some of you guys i will be happy :mrgreen: keep them cool vids coming!!

03-15-2007, 08:40 PM	#54 (permalink)
cudaboy_71 Registered Users My HF Map location Join Date: Jun 2005	very smooth fogger. nice. __________________ ˙ʇı ʞɐǝɹq 'ǝʞoɹq ʇ,uıɐ ʇı ɟı

03-15-2007, 11:47 PM	#55 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	fogger That is without a doubt the BEST onboard video I have seen yet! Sickle and Eibert say 5 THUMBS !!!UP A+ on the music A+ on the routine! A+ shooting an auto at the end! A+ on the camera mounting I love it man! FREAKIN AWESOME JOB and in fact I am going to post a link to it in the video forum! Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

03-16-2007, 12:03 AM	#56 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	Chris... I just watched that again and MAN I love it! FREAK man... I cant tell you how much I enjoyed the RIDE! The music fit perfect too... I did post your link in the HF video forum too... Nice job... BEST onboard I have seen yet man. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

03-16-2007, 01:51 AM	#58 (permalink)
bullaculla Registered Users Join Date: Nov 2006	Real nice foggy! beautiful auto! motivation to hit the sim. :mrgreen: __________________ T-Rex 600 HFE-stretched to 700, 10s, Tango 45-08, Jazz 55, JR7703D/S8900G, DJ Vegh nose cam mount. T-Rex 600 HFX-stretched to 700, 10s, Orbit 30-12, Jazz 55, GY611/S9256, Askman 360 mount. JR X9303.

03-16-2007, 03:14 AM	#59 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	GOD Fogger... simplicity at it's best! I love it! Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in