DX 6 throttle hold hep question

[Flying Foot Doc]

Hello all. Need help today, visiting my brother, he has a new DX 6. The throttle curve shows N 1 2 only. How do I get it show & use one with a throttle hold? I can get the throttle cut separately but that takes away the flight controls too. This is trying to set up his Blade 200. Thanks for the help, Andy

[MariaFan]

Andy,
On my new DX6, the "A" switch is the throttle hold switch.
Up is off, down is on.
If you don't have any batteries in the heli, you should be able to go to the Throttle curve menu, move the Throttle Hold switch down, and see the indicator move through N-1-2 as you move the Flight Mode switch (the G switch).
Hope this helps.

[Flying Foot Doc]

Thanks for the answer, I found those switches. On my DX7 & 9 throttle curves have N 1 2 & H. I'm trying to find out if I can set that up in the 6

[Phil D Basket]

Andy,

You might want to take a look at the Flight Mode Setup menu to verify that your hold switch has been assigned.

I'm using:

Switch 1: Switch B //assigns sw B to change mode
Hold Switch: Switch H //assigns sw H to hold

[Flying Foot Doc]

Got it working for him, much better now, thanks!

[MariaFan]

Originally Posted by Flying Foot Doc

Got it working for him, much better now, thanks!