engine remove

[RCF100]

anyone know how to take out the motor?? it seems like the clutch is stuck in the clutch bell... just doesn't come out any ideas??

[Foxden]

Originally Posted by RCF100

anyone know how to take out the motor?? it seems like the clutch is stuck in the clutch bell... just doesn't come out any ideas??

Take the engine mount out, this will give you a bit more room, you will need to take the clutch bell out so remove the bearing block bolts and try to wiggle it out as a unit, I've done it myself, just take a bit of patience but it all comes out

[DominicD]

Turn the starter shaft while pulling the engine down, this will allow the OWB to slip instead of grabbing while you pull.

[RCF100]

Originally Posted by DominicD

Turn the starter shaft while pulling the engine down, this will allow the OWB to slip instead of grabbing while you pull.

i ended up taking everything out before i saw your reply; but, you're right - the owb was stuck i guess and i could have just turned it and only take the motor out - that's what did it eventually.
i need to replace the starter shaft and clutch bell anyway, so no big deal - by the way, no one has a starter shaft in stock, which doesn't make any sense...
Thanks

[SeniorOnion]

Originally Posted by RCF100

ii need to replace the starter shaft and clutch bell anyway, so no big deal - by the way, no one has a starter shaft in stock, which doesn't make any sense...
Thanks

If you cannot get one in the States, they have them in stock here:

http://www.fast-lad.co.uk/store/r90n...y-p-12381.html

[RCF100]

Originally Posted by SeniorOnion

If you cannot get one in the States, they have them in stock here:

http://www.fast-lad.co.uk/store/r90n...y-p-12381.html

just got one, thank you