Wrong part in Spectra-G build?

[baseclass]

I hope this isn't a showstopper for my build (until I get a replacement). One of the ladder supports looks to be the wrong part. The round hole that the spark plug would go through is missing one one of the two. The cross supports within the part go from top to bottom. I can't describe it and apparently I cannot attach a pic directly. I can probably use the wrong part up front because, aside from the different design, the overall size looks right.

Anyone else heard of this happening?

k

[Peter]

Can't remember if either of mine came with different ladders , but they sure do have 'em now!!!

[Brian James]

PM sent

[baseclass]

As usual MA steps up and offers excellent support. I tested every dimension of the two parts and they're identical except for the lack of the spark plug hole in one. I simply used that one in the front and the one with the hole in the back. Probably just an old picture in the instructions and I was stressing out for no reason (again!) haha

k

[rbort]

I've seen the kit supplied with one ladder with a hole and another with an X. Just put the one with the hole on the spark plug side and your problems will be solved

-=>Raja.