Register Now

crawl · 09-01-2008, 08:38 PM

Trex 450 SE V2 - Silver CF - BNF (spektrum)
ar6100 Rx (pictured with ar7000, DOES NOT come with it, but does come with the ar6100 that I've been flying with for weeks)
Gy401 Gyro with 9650 Servo
65MG Servos
Gorilla Paddles and gear
KB Orange Tail blades
CF boom

Tenergy Micro Charger (with DC plug)
3 x Kong Power 2200mah 25c batts (well used, on way out, get between 5-3min on them depending on pack)

Align 450 Case

Lots of spare parts, pictured are 3 tail booms (2 alum 1 CF), flybar rods, New boom supports, new bottom plate, and some Fiber blades (inlayed CF, not real CF).
Also have a ton of other parts that will come with it, main gears, pinions, feathering spindles, main shafts, rods and end links, whole unopened set of hardware, thrust bearings, etc..

$550 shipped (continental US)
Paypal welcome with no additional charge.

Azlum · 09-02-2008, 07:43 AM

We also just the other day completely redid the head with all brand new rod and links. The previous owner had put some of the ball links on backwards so we started with a fresh kit and replaced them all and re-setup the head.

We also installed a brand new set of dampeners and regreased the thrust bearings.

The heli flies great and I will personally vouch for Crawl... he is a long time real life friend of mine and is very trustworthy.

crawl · 09-02-2008, 12:24 PM

Sold pending payment

jetpilot · 09-02-2008, 05:16 PM

sold to me!

Luc

09-01-2008, 08:38 PM	#1 (permalink)
crawl Registered Users Join Date: Jul 2008	WTS: Trex 450 SE V2/401/9650/65MG/Gorilla $550shipped Trex 450 SE V2 - Silver CF - BNF (spektrum) ar6100 Rx (pictured with ar7000, DOES NOT come with it, but does come with the ar6100 that I've been flying with for weeks) Gy401 Gyro with 9650 Servo 65MG Servos Gorilla Paddles and gear KB Orange Tail blades CF boom Tenergy Micro Charger (with DC plug) 3 x Kong Power 2200mah 25c batts (well used, on way out, get between 5-3min on them depending on pack) Align 450 Case Lots of spare parts, pictured are 3 tail booms (2 alum 1 CF), flybar rods, New boom supports, new bottom plate, and some Fiber blades (inlayed CF, not real CF). Also have a ton of other parts that will come with it, main gears, pinions, feathering spindles, main shafts, rods and end links, whole unopened set of hardware, thrust bearings, etc.. $550 shipped (continental US) Paypal welcome with no additional charge. __________________ Chris D. Last edited by crawl; 09-02-2008 at 07:43 AM..

09-02-2008, 07:43 AM	#2 (permalink)
Azlum Registered Users My HF Map location Join Date: Dec 2006	We also just the other day completely redid the head with all brand new rod and links. The previous owner had put some of the ball links on backwards so we started with a fresh kit and replaced them all and re-setup the head. We also installed a brand new set of dampeners and regreased the thrust bearings. The heli flies great and I will personally vouch for Crawl... he is a long time real life friend of mine and is very trustworthy. __________________ [ SAB Goblin ][ Trex 450 Pro ]

09-02-2008, 12:24 PM	#3 (permalink)
crawl Registered Users Thread Starter Join Date: Jul 2008	Sold pending payment __________________ Chris D.

09-02-2008, 05:16 PM	#4 (permalink)
jetpilot Registered Users Join Date: Jun 2005	sold to me! Luc __________________ Helicopter #1: T-rex 450 SE Helicopter #2: T-rex 500E Helicopter #3:T-rex-600 Nitro Helicopter #3:T-Rex 700 YS.91ST Hatori,8717,spartan 760,8900G, Control: X9303 Fly big Airbus to survive!( not remote lol..)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in