hc3sx tail wagging

[steve1]

Hi Guys

i had a slight crash on my t rex 700 and the boom got bent slight,so slight you could only tell when standing over the top of the heli
any way fitted new boom and reset up the tail mechanic's
left the tail gain at 51 on the heli and went for a fly tail was wagging side to side not all the time but not locked in like it was before
reset the gain to 41 and it got worse reset to 51 best i can get it, tried going higher but made it worse
i am still running the v11.3 firmware should i up date to the latest firmware or change the gyro setting from gy520 too gy611might may be that help it was faultless before
also wags in forward flight

any ideas

thanks steve

[DEMONjoe]

Pretty sure this has something to do with the rebulit mechanics. Check that everything is well assembled and all parts are moving smooth.

Anyway, you should update the firmware. Currently we are running V.116.
NOTE !!!! that from V.113 to a higher version, the assignment of the Hor-modes has changed. See new PC software V5.1 and manual V5.0 for details.

Joachim

[Goldenhour]

Its kind of hard to read the post with Fred Astaire in the corner.

[DEMONjoe]

Agreed but Fred is cool