START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
450 Class Electric Helicopters 450 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
11-01-2015, 02:52 PM | #1 (permalink) |
Registered Users
Join Date: Nov 2012
|
Gartt Double Push Tail Assembly(NEED ADVICE!)
Hello guys, I need advice. I am looking for new tail assembly for my HK450 V2 helicopter, because I can't fly it due to extreme vibrations which I believe is caused by slop in the tail(grip holders can move like 10deg freely). I found this one, but I'm not sure if it's worth to buy.
http://www.ebay.com/itm/161821642151...%3AMEBIDX%3AIT |
Sponsored Links | |||
Advertisement |
|
11-02-2015, 02:33 PM | #2 (permalink) |
Registered Users
Join Date: Nov 2014
|
I've not used the belt version, but I have been flying the tt version on a Tarot 480 Stretch I built earlier this year.
I have the Align unit on my 450L Dominator, that I'm currently building. The units are identical (no slop) with the exception of the head of four screws and the vertical fin mount area. HTHs
__________________
R/s Vidal K120, K110, HCP100, HCP100S, 300x, 300xfc, Trex 450L, 450Pro, 500Pro, 500L, 480 Tarot Stretch |
11-02-2015, 05:12 PM | #3 (permalink) |
Registered Users
Join Date: Apr 2015
|
WFCC.
I have the same bird and had the same vibration you have. It turned out the belt was twisted in the tail tube. I dipped the belt in some hot water to soften it some and pulled it through the tube with a wire from the other end. Making sure the belt did not twist while feeding it through. No more vibration and tensioned nicely. As for the linkage. Replace it with Align parts or Tarot parts. Mine is pretty tight with no slop. My issue was the tail link either too long or too short with the servo either one way or the other. Pete
__________________
I started with nothing and still have most of that left. DX7, 450 Frankenbird, 500 Align, Blade Nano CPs, Blade Inductrix. Chase 360, and F450 quad. |
11-02-2015, 05:49 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
It may be the case, but the fun thing is, that there is no vibrations without tail blades, but when i put tail blades, tail starts to shake violently in ~40-80% throttle range.
|
Thread Tools | |
Display Modes | |
|
|