Register Now

hopefull · 01-11-2009, 02:13 PM

Hello

trying to build this kit in the next couple of months

Can somebody help me find the right parts for my t-rex 450 se v2 ?

1 transmitter
2 receiver six channel or more
3 gyro
4 servo 9gx {3}
5 rudder servo {1}
T-REX 450SE NEW V2/Silver (3K Carbon Blades)
[KX015042A]

mainly interested in parts for the Futaba 7C 2.4GHz FASST Helicopter Radio System w/R617FS Receiver and 4-S3001 Servos

GunnyGlow · 01-11-2009, 02:19 PM

The "right" parts?? Pretty open.....

What is your budget?? Have you looked around??

I can tell you how I have mine setup...and what I think you should stick on it. BUT....what works for me might not work for you.

Is this your first heli?

-Gamah · 01-11-2009, 02:25 PM

the first kit here will get you flying for the least money
http://www.helihobby.com/html/trex_helicopter.html

pwoodyp · 01-11-2009, 02:41 PM

He said for looking for parts for HIS "t-rex 450 se v2" can we assume that's what he owns and is not looking for an entire kit.

-Gamah · 01-11-2009, 02:49 PM

he can take the electronics listed there... or just buy that and crash it a few times before he wrecks his V2

pwoodyp · 01-11-2009, 02:57 PM

Quote:

Originally Posted by -Gamah

he can take the electronics listed there... or just buy that and crash it a few times before he wrecks his V2

So you'd have him buy an heli than runs a plastic head and tail as replacement parts for a v2? LOL why not just recommend the parts he needs?

bobkatt · 01-11-2009, 02:59 PM

futaba 7c 2.4ghz
gyro futaba 401
tailservo futaba 9257
3* hitech hs65mg

-Gamah · 01-11-2009, 02:59 PM

i'm saying crash the plastics, replace with metal.

pwoodyp · 01-11-2009, 03:05 PM

Anyhow, moving on I won't recommend a radio or blades but -->

Tail Servo: 9257
3 x HS-65MG
Futaba GY401 Gyro

markleyland · 01-12-2009, 06:48 AM

Curtis youngblood baldes

TomRex · 01-12-2009, 08:30 AM

Curtis Youngblood is not bald!
Bite the bullet spend the bucks, do not skimp on your servos and gyro!
65MG's, 9257, 401 or 2100T gyro

WickedDragon · 01-12-2009, 02:24 PM

Quote:

Originally Posted by TomRex

Curtis Youngblood is not bald!
Bite the bullet spend the bucks, do not skimp on your servos and gyro!
65MG's, 9257, 401 or 2100T gyro

+1

Use the Align wood blades initially too.....it'll save a lot of $$$$s.

I personnally like Futaba 7c for the radio gear.

ken22golf · 01-12-2009, 02:35 PM

If you can, don't skimp on the electronics. Look on HF and RR classifieds or ebay and you might get a good deal.

I HAVE and recommend:
Futaba 7C Tx and R617FS Rx
3* HS-65MG
GY401
S9257 w/ stepdown

+1 on using woodies to begin, but I have been using Align 3K since because of the noticably better performance

markleyland · 01-12-2009, 03:30 PM

Quote:

Originally Posted by TomRex

Curtis Youngblood is not bald!
Bite the bullet spend the bucks, do not skimp on your servos and gyro!
65MG's, 9257, 401 or 2100T gyro

Yep, sorry for the seplling mistake there Curtis

jefierro · 01-12-2009, 05:33 PM

I recommend:
1. Hitec gyro Pro pack HG5000 gyro with 5065MG servos. (interactions, what are interactions?)
2. Two sets of extra lipos 3s 2200 20 or 25C
3. DX6i, is enough radio. with the included Rx
4. 1 hour daily sim practice until you get your directions sorted at least in hovering before your first flight. That alone is the best money saver.
5. Do all build related and 101 Bob's videos, all the info you'll need.

6. Redo no 4 in between flights.

just some pointers, that's what i did anyway.

01-11-2009, 02:13 PM	#1 (permalink)
hopefull Registered Users Join Date: Jan 2009	t-rex 450 se v2 Hello trying to build this kit in the next couple of months Can somebody help me find the right parts for my t-rex 450 se v2 ? 1 transmitter 2 receiver six channel or more 3 gyro 4 servo 9gx {3} 5 rudder servo {1} T-REX 450SE NEW V2/Silver (3K Carbon Blades) [KX015042A] mainly interested in parts for the Futaba 7C 2.4GHz FASST Helicopter Radio System w/R617FS Receiver and 4-S3001 Servos

01-12-2009, 06:48 AM	#10 (permalink)
markleyland Registered Users Join Date: Dec 2007	Curtis youngblood baldes __________________ "Sort your head out and fly with your heart" Trex 450 SE V2: 9257 tail, Spartan Quark, HS65mg cyclic, DX7-AR7000, NEU 1107h/2y, Jazz Esc, Trex 550 FBL: Jive 100+LV, KDE/NEU 1907H/1/N42, Vbar 5.3, Futaba BLS 251

01-12-2009, 08:30 AM	#11 (permalink)
TomRex Registered Users My HF Map location Join Date: May 2006	Curtis Youngblood is not bald! Bite the bullet spend the bucks, do not skimp on your servos and gyro! 65MG's, 9257, 401 or 2100T gyro __________________ How much past 200 mph do I need to go you ask?

01-12-2009, 02:35 PM	#13 (permalink)
ken22golf Registered Users My HF Map location Join Date: Sep 2008	If you can, don't skimp on the electronics. Look on HF and RR classifieds or ebay and you might get a good deal. I HAVE and recommend: Futaba 7C Tx and R617FS Rx 3* HS-65MG GY401 S9257 w/ stepdown +1 on using woodies to begin, but I have been using Align 3K since because of the noticably better performance __________________ 8S Trex 500 ESP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-2009, 02:19 PM	#2 (permalink)
GunnyGlow Registered Users My HF Map location Join Date: Feb 2008	The "right" parts?? Pretty open..... What is your budget?? Have you looked around?? I can tell you how I have mine setup...and what I think you should stick on it. BUT....what works for me might not work for you. Is this your first heli?

01-11-2009, 02:25 PM	#3 (permalink)
-Gamah My HF Map location Join Date: Nov 2008	the first kit here will get you flying for the least money http://www.helihobby.com/html/trex_helicopter.html

01-11-2009, 02:41 PM	#4 (permalink)
pwoodyp My HF Map location Join Date: Mar 2008	He said for looking for parts for HIS "t-rex 450 se v2" can we assume that's what he owns and is not looking for an entire kit.

01-11-2009, 02:49 PM	#5 (permalink)
-Gamah My HF Map location Join Date: Nov 2008	he can take the electronics listed there... or just buy that and crash it a few times before he wrecks his V2

01-11-2009, 02:59 PM	#7 (permalink)
bobkatt Join Date: Jul 2008	futaba 7c 2.4ghz gyro futaba 401 tailservo futaba 9257 3* hitech hs65mg

01-11-2009, 02:59 PM	#8 (permalink)
-Gamah My HF Map location Join Date: Nov 2008	i'm saying crash the plastics, replace with metal.

01-11-2009, 03:05 PM	#9 (permalink)
pwoodyp My HF Map location Join Date: Mar 2008	Anyhow, moving on I won't recommend a radio or blades but --> Tail Servo: 9257 3 x HS-65MG Futaba GY401 Gyro

01-12-2009, 05:33 PM	#15 (permalink)
jefierro Registered Users My HF Map location Join Date: Nov 2008	I recommend: 1. Hitec gyro Pro pack HG5000 gyro with 5065MG servos. (interactions, what are interactions?) 2. Two sets of extra lipos 3s 2200 20 or 25C 3. DX6i, is enough radio. with the included Rx 4. 1 hour daily sim practice until you get your directions sorted at least in hovering before your first flight. That alone is the best money saver. 5. Do all build related and 101 Bob's videos, all the info you'll need. 6. Redo no 4 in between flights. just some pointers, that's what i did anyway.

Register Now

Log-in