Advice Aurora 90 nitro swash conversion

[enrico]

Hi all,

If I switch the head from FB to FBL, do I only need to swap heads or do I need to do any other specific mods? I am trying to go from a FB head to a FBL rigidcore head. I got brand new links for the rigid core head and the head itself, but do I need anything else, like different swash plate or links or anything?

Any advice will be greatly appreciated!

Thanks

Enrico

[boomstrike5]

I know when i changed my electric from FB to FBL, All i changed was the head. I would think the nitro should be the same. You will need to change the ball spacing on the servo horns.

Leon

[B.R.C.]

The swash will need new longer balls on the servo side I believe and you will move the servo wheel balls in although I don't remember the spacing off the top of my head but if you search the forum that's where I found it.

[enrico]

Thanks Leon and B. R.C for the advice, any idea what is the name or part number of the longer swash ball links so i can order them from carbonextreme? Thanks again!
Enrico

[j bomb]

I can't seem to find the swash balls on Carbon Xtreme's website, they are identified as M3 long ball on my instruction sheet but no part # is given. They are 10mm from mounting surface to center of ball.

On my Aurora, I'm using the 6-sided Futaba servo horns with the balls in the middle holes, the spacing is ~10.5mm from center I believe.