Help setting up my 450 dominator

[jamessmithv71060]

I'm sitting here with this beautiful bird in front of me and can't get it! I've got a dominator 450 running 6s, ar7200bx and a dx7 v2. I've got the left cyclic plugged into the aile and the right cyclic plugged into the pitch on my AR. I need someone to list the programming parameters for the dx7 all my servos move correct direction but some are sluggish and seem to correct way to fast after I stop giving input. Swash mix in my dx7 is under swashplate right? I'm just a Lil lost and frustrated.

[BELL SKY]

sorry, wong post

[Dylan Hudock]

What do you mean by slow and sluggish? When using an fbl unit, you are not controlling the servos themselves, the fbl unit is. It will give whatever input needed to get the heli to do what you told it to. When it is sitting on the ground, you can't really replicate what they will do in the air. Could you post a video of what you think the issue is?

[bad007]

Originally Posted by jamessmithv71060

I'm sitting here with this beautiful bird in front of me and can't get it! I've got a dominator 450 running 6s, ar7200bx and a dx7 v2. I've got the left cyclic plugged into the aile and the right cyclic plugged into the pitch on my AR. I need someone to list the programming parameters for the dx7 all my servos move correct direction but some are sluggish and seem to correct way to fast after I stop giving input. Swash mix in my dx7 is under swashplate right? I'm just a Lil lost and frustrated.

Swash mix and AR7200BX don't go in the same paragraph.
Mixing is all performed by the BX.. When you did the initial setup for the AR7200 swash should be set to normal and swash mix disappears in the DX7 menu.
Programming parameters for the DX7? Really none till you complete a proper setup. It's all in the manual. What version software?
You need for know the software version no, 3 and 4 are a bit different.
Page 6 on the PDF describes initial setup http://www.spektrumrc.com/ProdInfo/F...-Manual_EN.pdf
The manuals at Aligns web site are easier to use.
http://www.align.com.tw/manuals-en/flybarless/
Then there's BX and you can download a quick reference card and manual that has a bit more info but not good for initial setup to follow.
http://www.beastx.com/eng/support.php

[CrashNburn420]

The full setup is explained in these videos. https://www.helifreak.com/showthread.php?t=268460