Register Now

Big Air · 07-30-2013, 06:58 PM

OK, I originally posted this in the tips forum but I thought I would try here. I have a Walkera V450D03. I have replaced the ESC twice with the same result. Everything works except the motor. I let the TX boot up and set it to full throttle. I plug in the battery for the Heli. The RX beeps twice and I immediately lower the throttle all the way. Nothing happens. It is my understanding that I should get a beep when lowering the throttle. I have searched on this with no luck. I even emailed Walkera. We'll see how that goes. Does anyone have any ideas on this???? The heli only has about five flights on it. The reason I am replacing the ESC is that I want a different plug on it. The old on worked fine but I no longer have it. Looking forward to suggestions. Thanks.

Big Air · 08-01-2013, 04:56 PM

My eyes are getting old. I know I checked the connection to the RX several times. Sometimes, you've just got to walk away. Upon further inspection, I had the ESC plug one socket over. DUH......... Plugged into the correct socket and it fired right up. BTW, this is the stock RX and ESC. It is plug and play as long as one can plug it into the proper plug. I hope this helps anyone else having ESC problems.

07-30-2013, 06:58 PM	#1 (permalink)
Big Air Registered Users Join Date: Mar 2013	Help .......... OK, I originally posted this in the tips forum but I thought I would try here. I have a Walkera V450D03. I have replaced the ESC twice with the same result. Everything works except the motor. I let the TX boot up and set it to full throttle. I plug in the battery for the Heli. The RX beeps twice and I immediately lower the throttle all the way. Nothing happens. It is my understanding that I should get a beep when lowering the throttle. I have searched on this with no luck. I even emailed Walkera. We'll see how that goes. Does anyone have any ideas on this???? The heli only has about five flights on it. The reason I am replacing the ESC is that I want a different plug on it. The old on worked fine but I no longer have it. Looking forward to suggestions. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-01-2013, 04:56 PM	#2 (permalink)
Big Air Registered Users Thread Starter Join Date: Mar 2013	My eyes are getting old. I know I checked the connection to the RX several times. Sometimes, you've just got to walk away. Upon further inspection, I had the ESC plug one socket over. DUH......... Plugged into the correct socket and it fired right up. BTW, this is the stock RX and ESC. It is plug and play as long as one can plug it into the proper plug. I hope this helps anyone else having ESC problems.

Register Now

Log-in