Register Now

kwade · 10-03-2010, 08:14 PM

I have just built a 60 V2 and i have one large washer left that was in one of the last bags with servo hardware and i can not see where it goes nor do i see this on the parts list for the last few sections. It looks like a washer that is large enough to fit the main shalt. Has any one run across this.

K-Town

Lzfalcon · 10-04-2010, 10:26 PM

Hey Kwade
is the inner diameter the same as the main shaft or the spindle. There is a thrust washer between the the thrust bearings and the bearing in the blade grip. Just a thought

kwade · 10-08-2010, 06:45 PM

Thanks for the reply Lzfalcon but the washer is approx 16mm od with id of 10mm. I have sent a request to Thunder Tiger and they wanted a photo so i sent one. Hope to hear from those guys in the next few days because this has me puzzeled.

Ktown

kwade · 10-19-2010, 07:02 PM

Hey guys thurder tiger tells me the washer is for the cooling fan. This thru me because my engine came with a washer.

Ktown

10-03-2010, 08:14 PM	#1 (permalink)
kwade Registered Users Join Date: Nov 2009	Raptor 60V2 Build Question I have just built a 60 V2 and i have one large washer left that was in one of the last bags with servo hardware and i can not see where it goes nor do i see this on the parts list for the last few sections. It looks like a washer that is large enough to fit the main shalt. Has any one run across this. K-Town __________________ K-Town Flyer

10-04-2010, 10:26 PM	#2 (permalink)
Lzfalcon Registered Users My HF Map location Join Date: Jan 2005 Location: Plymouth MA	Hey Kwade is the inner diameter the same as the main shaft or the spindle. There is a thrust washer between the the thrust bearings and the bearing in the blade grip. Just a thought __________________ "Just Fly It" AMA 819728

10-08-2010, 06:45 PM	#3 (permalink)
kwade Registered Users Thread Starter Join Date: Nov 2009	Raptor 60 Build Question Thanks for the reply Lzfalcon but the washer is approx 16mm od with id of 10mm. I have sent a request to Thunder Tiger and they wanted a photo so i sent one. Hope to hear from those guys in the next few days because this has me puzzeled. Ktown __________________ K-Town Flyer

10-19-2010, 07:02 PM	#4 (permalink)
kwade Registered Users Thread Starter Join Date: Nov 2009	Raptor 60 Washer Hey guys thurder tiger tells me the washer is for the cooling fan. This thru me because my engine came with a washer. Ktown __________________ K-Town Flyer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in