Register Now

Chris Sexton · 02-02-2012, 09:13 AM

This has been a good resource on other threads, and I didn't see another dedicated to just listing setups. With the release just next week, lets start listing out your planed setup. For reference sake, lets try and list them in a similar format. Also, please keep on topic, discussing your setup is encouraged, but lets not start a "why mine is better than yours" thread.

X7
Flight Style:
FBL System:
Motor:
Pinion:
Target Headspeed(s):
ESC:
Governor:
BEC:
RX Pack:
Cyclic Servos:
Tail Servo:
Main Blades:
Tail Blades:
Lipos:

Chris Sexton · 02-02-2012, 09:15 AM

Mine:

X7
Flight Style: Sport
FBL System: Spektrum AR7200BX
Motor: Scorpion HKIII-4035-500
Pinion: 11T or 12T - Ordered both
Target Headspeed(s): 2200/2300
ESC: CC ICE2 120HV
Governor: CC
BEC: CC BEC PRO V2
RX Pack: None
Cyclic Servos: Savox SB-2271SG @ 7.4v
Tail Servo: Savox SB-2272SG @ 7.4v
Main Blades: Rail 696
Tail Blades: Rail 106
Lipos: Hyperion VX G3 35C 4200mAh (12s)

akamullen · 02-02-2012, 09:32 AM

X7
Flight Style: Med/Hard 3D
FBL System: Spektrum AR7200BX
Motor: HKIII 4035-500
Pinion: ??
Target Headspeed(s): 2250/2300
ESC: CC 120
Governor: internal
BEC: Gryphon 75V 20A Hyper HV BEC
RX Pack: none
Cyclic Servos: Savox 2271SG brushless @ 8.4
Tail Servo: Outrage Torque BL9188 @8.4
Main Blades: EDGE SE 693mm
Tail Blades: Edge 105's
Lipos: Voltz 5000 65C, Pulse 5000 65C

jaubertel · 02-02-2012, 09:50 AM

For X7 (#1 ou #2 I d'ont know)

X7
Flight Style: Hard 3D
FBL System: BeastX V3.08
Motor: Scorpion 4525-520LE
Pinion: 11T or 12T
Target Headspeed(s): 1750 / 1950 / 2100
ESC: Castle 160HV / Scorpion V 130A
Governor: Yes
BEC: No BEC
RX Pack: LifePO4 2100 2S
Cyclic Servos: MKS DS670
Tail Servo: Align DS650
Main Blades: Funkey / Edge 693mm
Tail Blades: Funkey / Align
Lipos: Flighmax Zippy 4500 45C (in wait of RB LIPO)

Rob Cherry · 02-02-2012, 10:36 AM

Flight Style: Nuts Smack
FBL System: vBar 5.2
Motor: HKIII 4035-560
Pinion: 10T
Target Headspeed(s): 2000/2200/2400
ESC: YGE 120HV
Governor: vBar gov
BEC: Gryphon 75V 20A Hyper HV BEC
RX Pack: none
Cyclic Servos: Savox 2271SG brushless @ 8.4
Tail Servo: Outrage Torque BL9188 @8.4
Main Blades: EDGE FB 693mm
Tail Blades: SAB 95 Red Devil
Lipos: Gens 5300 30C

Matt Nasca · 02-02-2012, 02:46 PM

Flight Style: Fast Big Air / Smack 3D
FBL System: Mikado Full Size VBar 5.2 Pro
Motor: Scorpion 4525-520 LE
Pinion: 11T
Target Headspeed(s): 2145-2334-2430
ESC: Scorpion Commander V 130A
Governor: VBar gov
BEC: Scorpion Built-in BEC
RX Pack: None
Cyclic Servos: JR 8917HV @ 7.4
Tail Servo: Futaba BLS256HV @ 7.4
Main Blades: EDGE 693 SE FBL
Tail Blades: EDGE 95mm
Lipos: Voltz 65C 5100 mAh

akschu · 02-07-2012, 01:13 AM

X7
Flight Style: Sport/Mild 3D
FBL System: BeastX
Motor: Scorpion 4035-500
Pinion: 10t, 11t, 12t
Target Headspeed(s): 2000, 21500, 2300
ESC: ZTW 120A Opto
Governor: none
BEC: CC BEC Pro wired for 6s at 7.4v
RX Pack: none
Cyclic Servos: Savox 2271
Tail Servo: Savox 2272
Main Blades: Align HD690B
Tail Blades: KBDD 102mm
Lipos: Spyder 6s5300

Sandu · 02-07-2012, 03:17 PM

Flight Style: 3D
FBL System: BeastX v. 3
Motor: HK4035-500kv
Pinion: 10t going to be bigger
Target Headspeed(s): 2200
ESC: Castle Creations 120HV2
Governor: Castle
BEC: Gryphon 75V 20A Hyper HV BEC
RX Pack: none
Cyclic Servos: savöx SC-1267SG
Tail Servo: Savöx SH-1290MG
Main Blades: rotortech 690mm
Tail Blades: rotortech 105mm
Lipos: turnigy 5000mAh 40C 6s X4

zxiicci · 02-07-2012, 03:17 PM

X7
Flight Style: 3D
FBL System: BeastX V3.08
Motor: Scorpion 4035-500kv
Pinion: 11 or 12T
Target Headspeed(s): 2100
ESC: Scorpion commander V 130HV with bec
Governor: Yes
BEC: commander V
RX Pack:-
Cyclic Servos: Savöx TG1258
Tail Servo: Savöx 1290MG
Main Blades: Rotortech 693mm
Tail Blades: Rotortech
Lipos: turnigy 5000mAh 40C 6

frito169 · 02-10-2012, 06:52 AM

Anyone planning on using a hk-4035-5xx should know the 25mm bolt pattern wont fit on the motor mount you need the hkIII-4035-5xx with both the 25 and 30mm mounting holes and you can only use 2 bolts.

zxiicci · 02-10-2012, 07:17 AM

Quote:

Originally Posted by frito169

Anyone planning on using a hk-4035-5xx should know the 25mm bolt pattern wont fit on the motor mount you need the hkIII-4035-5xx with both the 25 and 30mm mounting holes and you can only use 2 bolts.

Actually Gaui X7 A combo comes with scorpion HKIII-4035-500kv (this one: http://www.scorpionsystem.com/catalo...KIII_4035_500/ )
motor and its bolted on to motor mount with 4 bolts!

How do i know? because I have one and it flew first time today!

Rob Cherry · 02-14-2012, 03:14 PM

Quote:

Originally Posted by zxiicci

Actually Gaui X7 A combo comes with scorpion HKIII-4035-500kv (this one: http://www.scorpionsystem.com/catalo...KIII_4035_500/ )
motor and its bolted on to motor mount with 4 bolts!

How do i know? because I have one and it flew first time today!

Weird indeed. The HK3-4035-560 doesn't mount with all 4 bolts, but only the 30mm pair.

Sandu · 02-14-2012, 03:52 PM

I have one too bolted with 4 bolts. Maby it's some gauis special model made for X7 or something

Chris Sexton · 02-14-2012, 06:51 PM

Only two bolts on my hkiii-4035-500 lined up.

Sent from my iPhone using Tapatalk

Patrick Senjay · 02-15-2012, 05:17 AM

X7
Flight Style: Sport & Soft 3D <=== (for now)
FBL System: Mikado V-bar 5.2pro
Motor: Gaui/Scorpion HKIII 4035 - 500KV
Pinion: 11T
Target Headspeed(s): 1800 - 1950 - 2180
ESC: YGE 160 HV
Governor: V-Bar Governor
BEC: Gryphon Quasar
RX Pack: None
Cyclic Servos: Futaba BLS 156HV @ 8.4v
Tail Servo: Futaba BLS 256HV @ 8.4v
Main Blades: Edge FBL 713mm
Tail Blades: Edge 105mm
Lipos: Hyperion 4200 35c

bjb714 · 02-15-2012, 06:58 AM

Flight Style: Sport and Light 3D
FBL System: MIkado Mini V-Bar 5.2
Motor: Scorpion HKIII 4035-500
Pinion: 12T
Target Headspeed: 2200
ESC: Castle ICE2 120HV
Governor: Castle
BEC: Castle BEC PRO V2
RX Pack: None
Cyclic Servos: Savox 1268MG@ 7.4v
Tail Servo: Outrage Torq 9188@ 7.4v
Main Blades: Edge 693
Tail Blades: Edge 105
Lipos: Chrome 6S 5000 35c x2

ragtop01 · 02-15-2012, 10:36 PM

Flight Style: 3D wanna smack
FBL System: beastx
Motor: 700mx
Pinion: 10
Target Headspeed(s): 2400
ESC: Castle ICE2 80hv
Governor: 100 flat
BEC: CC bec pro on 12s
RX Pack:
Cyclic Servos: ds610
Tail Servo: ds620
Main Blades: Sab 690
Tail Blades: Stealth 105
Lipos: GensAce 4000 12s

savage600 · 02-25-2012, 08:37 PM

X7
Flight Style: Sports flying and some 3d
FBL System: Beast-x v3
Motor: Scorpion 4525 520
Pinion: 10 tooth
Target Headspeed(s): ?
ESC: New scorpion 130 amp
Governor:maybe
BEC:CC bec pro
RX Pack: kypom
Cyclic Servos:Inolab 850 mg's
Tail Servo:Futaba bls 251
Main Blades : domonis hagele 711's
Tail Blades:carbons to match mains
Lipos:Turnigy 5000's

Still a couple of weeks till I get her in the air, but will be worth the wait.

Cheers dave.

xfactor6 · 03-01-2012, 07:44 AM

Quote:

Originally Posted by ragtop01

Flight Style: 3D wanna smack
FBL System: beastx
Motor: 700mx
Pinion: 10
Target Headspeed(s): 2400
ESC: Castle ICE2 80hv
Governor: 100 flat
BEC: CC bec pro on 12s
RX Pack:
Cyclic Servos: ds610
Tail Servo: ds620
Main Blades: Sab 690
Tail Blades: Stealth 105
Lipos: GensAce 4000 12s

hey, i saw you are running a 700mx, what did you do about the pinion not touching the main shaft 100%? mine only touches about 75% did you grind another spot for the grub screw that holds it and move the pinion down?

Magooch · 03-05-2012, 08:43 PM

X7
Flight Style: sport, entry 3d

FBL System: beastX
Motor: Scorpion HKIII 4035-500
Pinion: 11
Target Headspeed(s): 1900 2000 2100
ESC: CC ICE2 120HV
Governor: CC
BEC: CC BEC PRO
RX Pack: none
Cyclic Servos: Savox 1258 TG
Tail Servo: Savox 1290 MG
Main Blades: Edge 693
Tail Blades: Edge 105
Lipos: Turnigy 5000 (for now)

The kit is still being shipped (thanks Dave!), just looking at pictures for now

... Feel like an impatient little kid, so looking forward to this build!

02-02-2012, 09:13 AM	#1 (permalink)
Chris Sexton Registered Users My HF Map location Join Date: Feb 2011	Your GAUI X7 Setup This has been a good resource on other threads, and I didn't see another dedicated to just listing setups. With the release just next week, lets start listing out your planed setup. For reference sake, lets try and list them in a similar format. Also, please keep on topic, discussing your setup is encouraged, but lets not start a "why mine is better than yours" thread. X7 Flight Style: FBL System: Motor: Pinion: Target Headspeed(s): ESC: Governor: BEC: RX Pack: Cyclic Servos: Tail Servo: Main Blades: Tail Blades: Lipos: __________________ Synergy Factory Specialist / Rail Blades / Team Scorpion

02-02-2012, 09:15 AM	#2 (permalink)
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011	Mine: X7 Flight Style: Sport FBL System: Spektrum AR7200BX Motor: Scorpion HKIII-4035-500 Pinion: 11T or 12T - Ordered both Target Headspeed(s): 2200/2300 ESC: CC ICE2 120HV Governor: CC BEC: CC BEC PRO V2 RX Pack: None Cyclic Servos: Savox SB-2271SG @ 7.4v Tail Servo: Savox SB-2272SG @ 7.4v Main Blades: Rail 696 Tail Blades: Rail 106 Lipos: Hyperion VX G3 35C 4200mAh (12s) __________________ Synergy Factory Specialist / Rail Blades / Team Scorpion Last edited by Chris Sexton; 02-02-2012 at 03:04 PM..

02-02-2012, 09:32 AM	#3 (permalink)
akamullen Registered Users My HF Map location Join Date: Feb 2009	X7 Flight Style: Med/Hard 3D FBL System: Spektrum AR7200BX Motor: HKIII 4035-500 Pinion: ?? Target Headspeed(s): 2250/2300 ESC: CC 120 Governor: internal BEC: Gryphon 75V 20A Hyper HV BEC RX Pack: none Cyclic Servos: Savox 2271SG brushless @ 8.4 Tail Servo: Outrage Torque BL9188 @8.4 Main Blades: EDGE SE 693mm Tail Blades: Edge 105's Lipos: Voltz 5000 65C, Pulse 5000 65C __________________ AnythingHeli.com OWNER/ TEAM PILOT GAUI X5 / X7 * GOBLIN G380/R420/G500-x2/R580/G650/R700/G770 (and many others)* Swinging Rotortech Blades * OMP M1 & M2 * MSH Brain * * iX12*

02-02-2012, 10:36 AM	#5 (permalink)
Rob Cherry Registered Users My HF Map location Join Date: Mar 2010	Flight Style: Nuts Smack FBL System: vBar 5.2 Motor: HKIII 4035-560 Pinion: 10T Target Headspeed(s): 2000/2200/2400 ESC: YGE 120HV Governor: vBar gov BEC: Gryphon 75V 20A Hyper HV BEC RX Pack: none Cyclic Servos: Savox 2271SG brushless @ 8.4 Tail Servo: Outrage Torque BL9188 @8.4 Main Blades: EDGE FB 693mm Tail Blades: SAB 95 Red Devil Lipos: Gens 5300 30C __________________ Stuff Last edited by Rob Cherry; 02-02-2012 at 04:17 PM..

02-02-2012, 02:46 PM	#6 (permalink)
Matt Nasca Registered Users My HF Map location Join Date: Jan 2010	Flight Style: Fast Big Air / Smack 3D FBL System: Mikado Full Size VBar 5.2 Pro Motor: Scorpion 4525-520 LE Pinion: 11T Target Headspeed(s): 2145-2334-2430 ESC: Scorpion Commander V 130A Governor: VBar gov BEC: Scorpion Built-in BEC RX Pack: None Cyclic Servos: JR 8917HV @ 7.4 Tail Servo: Futaba BLS256HV @ 7.4 Main Blades: EDGE 693 SE FBL Tail Blades: EDGE 95mm Lipos: Voltz 65C 5100 mAh __________________ GAUI NX7 - GAUI X7 - GAUI X5 - GAUI NX4 - GAUI GX4 - GAUI X4 II - GAUI X3 - GAUI X2 - All on VBar 5.3 Pro Team GAUI USA / Empire Hobby / Scorpion Power Systems / Optipower Batteries / Cyclone Blades / Savox / YS Engines / VP PowerMaster / JR Last edited by Matt Nasca; 02-14-2012 at 06:56 PM.. Reason: Changed pinion & HS

02-02-2012, 09:50 AM	#4 (permalink)
jaubertel Registered Users Join Date: Nov 2011	For X7 (#1 ou #2 I d'ont know) X7 Flight Style: Hard 3D FBL System: BeastX V3.08 Motor: Scorpion 4525-520LE Pinion: 11T or 12T Target Headspeed(s): 1750 / 1950 / 2100 ESC: Castle 160HV / Scorpion V 130A Governor: Yes BEC: No BEC RX Pack: LifePO4 2100 2S Cyclic Servos: MKS DS670 Tail Servo: Align DS650 Main Blades: Funkey / Edge 693mm Tail Blades: Funkey / Align Lipos: Flighmax Zippy 4500 45C (in wait of RB LIPO)

02-07-2012, 01:13 AM	#7 (permalink)
akschu Registered Users Join Date: Jan 2007	X7 Flight Style: Sport/Mild 3D FBL System: BeastX Motor: Scorpion 4035-500 Pinion: 10t, 11t, 12t Target Headspeed(s): 2000, 21500, 2300 ESC: ZTW 120A Opto Governor: none BEC: CC BEC Pro wired for 6s at 7.4v RX Pack: none Cyclic Servos: Savox 2271 Tail Servo: Savox 2272 Main Blades: Align HD690B Tail Blades: KBDD 102mm Lipos: Spyder 6s5300 Last edited by akschu; 02-10-2012 at 03:06 PM.. Reason: Update parts list since the scorpion commander isn't available.

02-07-2012, 03:17 PM	#8 (permalink)
Sandu Registered Users Join Date: Jan 2012	Flight Style: 3D FBL System: BeastX v. 3 Motor: HK4035-500kv Pinion: 10t going to be bigger Target Headspeed(s): 2200 ESC: Castle Creations 120HV2 Governor: Castle BEC: Gryphon 75V 20A Hyper HV BEC RX Pack: none Cyclic Servos: savöx SC-1267SG Tail Servo: Savöx SH-1290MG Main Blades: rotortech 690mm Tail Blades: rotortech 105mm Lipos: turnigy 5000mAh 40C 6s X4 __________________ Team Gaui Finland - Heliteam Nummela

02-07-2012, 03:17 PM	#9 (permalink)
zxiicci Registered Users Join Date: Jan 2012	X7 Flight Style: 3D FBL System: BeastX V3.08 Motor: Scorpion 4035-500kv Pinion: 11 or 12T Target Headspeed(s): 2100 ESC: Scorpion commander V 130HV with bec Governor: Yes BEC: commander V RX Pack:- Cyclic Servos: Savöx TG1258 Tail Servo: Savöx 1290MG Main Blades: Rotortech 693mm Tail Blades: Rotortech Lipos: turnigy 5000mAh 40C 6 Last edited by zxiicci; 02-10-2012 at 07:48 AM..

02-10-2012, 06:52 AM	#10 (permalink)
frito169 Registered Users Join Date: Jan 2009	hk-4035-5xx Anyone planning on using a hk-4035-5xx should know the 25mm bolt pattern wont fit on the motor mount you need the hkIII-4035-5xx with both the 25 and 30mm mounting holes and you can only use 2 bolts.

02-14-2012, 03:52 PM	#13 (permalink)
Sandu Registered Users Join Date: Jan 2012	I have one too bolted with 4 bolts. Maby it's some gauis special model made for X7 or something __________________ Team Gaui Finland - Heliteam Nummela

02-14-2012, 06:51 PM	#14 (permalink)
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011	Only two bolts on my hkiii-4035-500 lined up. Sent from my iPhone using Tapatalk __________________ Synergy Factory Specialist / Rail Blades / Team Scorpion

02-15-2012, 05:17 AM	#15 (permalink)
Patrick Senjay Registered Users Join Date: Mar 2011	X7 Flight Style: Sport & Soft 3D <=== (for now) FBL System: Mikado V-bar 5.2pro Motor: Gaui/Scorpion HKIII 4035 - 500KV Pinion: 11T Target Headspeed(s): 1800 - 1950 - 2180 ESC: YGE 160 HV Governor: V-Bar Governor BEC: Gryphon Quasar RX Pack: None Cyclic Servos: Futaba BLS 156HV @ 8.4v Tail Servo: Futaba BLS 256HV @ 8.4v Main Blades: Edge FBL 713mm Tail Blades: Edge 105mm Lipos: Hyperion 4200 35c Last edited by Patrick Senjay; 02-28-2012 at 04:54 AM..

02-15-2012, 06:58 AM	#16 (permalink)
bjb714 Registered Users Join Date: Feb 2011	Flight Style: Sport and Light 3D FBL System: MIkado Mini V-Bar 5.2 Motor: Scorpion HKIII 4035-500 Pinion: 12T Target Headspeed: 2200 ESC: Castle ICE2 120HV Governor: Castle BEC: Castle BEC PRO V2 RX Pack: None Cyclic Servos: Savox 1268MG@ 7.4v Tail Servo: Outrage Torq 9188@ 7.4v Main Blades: Edge 693 Tail Blades: Edge 105 Lipos: Chrome 6S 5000 35c x2 __________________ Gaui X7 • X5• NX4 • Goblin 700 • 500 •Align T-Rex 700 Nitro • 550 Pro DFC • 500 Pro • 500 ESP • 450L Dominator • 450 Pro • 250 SE • Blade 300x • 130x • Nano • DX8

02-15-2012, 10:36 PM	#17 (permalink)
ragtop01 Registered Users My HF Map location Join Date: Dec 2009	Flight Style: 3D wanna smack FBL System: beastx Motor: 700mx Pinion: 10 Target Headspeed(s): 2400 ESC: Castle ICE2 80hv Governor: 100 flat BEC: CC bec pro on 12s RX Pack: Cyclic Servos: ds610 Tail Servo: ds620 Main Blades: Sab 690 Tail Blades: Stealth 105 Lipos: GensAce 4000 12s __________________ "just let it happen"

02-25-2012, 08:37 PM	#18 (permalink)
savage600 Registered Users Join Date: Mar 2008	X7 Flight Style: Sports flying and some 3d FBL System: Beast-x v3 Motor: Scorpion 4525 520 Pinion: 10 tooth Target Headspeed(s): ? ESC: New scorpion 130 amp Governor:maybe BEC:CC bec pro RX Pack: kypom Cyclic Servos:Inolab 850 mg's Tail Servo:Futaba bls 251 Main Blades : domonis hagele 711's Tail Blades:carbons to match mains Lipos:Turnigy 5000's Still a couple of weeks till I get her in the air, but will be worth the wait. Cheers dave. __________________ dx3r, dx3r pro, baja 5sct shorty, hpi savage xs flux, hpi firestorm flux, axial scx10, beam E4 V2 x2, mcpx x3.

03-05-2012, 08:43 PM	#20 (permalink)
Magooch Registered Users Join Date: Feb 2011	X7 Flight Style: sport, entry 3d FBL System: beastX Motor: Scorpion HKIII 4035-500 Pinion: 11 Target Headspeed(s): 1900 2000 2100 ESC: CC ICE2 120HV Governor: CC BEC: CC BEC PRO RX Pack: none Cyclic Servos: Savox 1258 TG Tail Servo: Savox 1290 MG Main Blades: Edge 693 Tail Blades: Edge 105 Lipos: Turnigy 5000 (for now) The kit is still being shipped (thanks Dave!), just looking at pictures for now ... Feel like an impatient little kid, so looking forward to this build! __________________ Trex- 250, 450~Oxy4~Gaui X7 Last edited by Magooch; 03-06-2012 at 01:27 AM.. Reason: Update

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in