mcpx v2 binding problems

[morningstar]

Hi guys,, this thing is driving me crazy..I have a dx7s, just changed the 3in1 to v2... bound it and the blue light blinks 3 times now with all collective working but no motor functions... any help anyone PLEASE????

[ebeing]

Is this your first time binding?

try holding right rudder and the train button, then turn on the tx.

wait a few second then release the train button, release the rudder when the heli binds.

I love my DX7s. Which setting are you using for the DX7s?

[morningstar]

i have done like you said... i have had a v1 for over a year and just changed to the v2 board... held the trainer while the rudder was in full down right rudder, it binds but with no motor functions and complete cyclic...plus instead of the blue light constant it blinks in 3....

[revpaul]

Originally Posted by morningstar

i have done like you said... i have had a v1 for over a year and just changed to the v2 board... held the trainer while the rudder was in full down right rudder, it binds but with no motor functions and complete cyclic...plus instead of the blue light constant it blinks in 3....

DX6i with brothers VS@...
i used "HH technician instructions" and held right rudder while holding trainer switch for a two count then release training switch while still holding right rudder until solid LED. but i still got no joy...solid LED but no fly.

i mentioned in my thread about what settings i had wrong (REVERS screen -Pitch was still set to N. not right setting.

[syar]

Originally Posted by morningstar

Hi guys,, this thing is driving me crazy..I have a dx7s, just changed the 3in1 to v2... bound it and the blue light blinks 3 times now with all collective working but no motor functions... any help anyone PLEASE????

Hi, I got the same situation last week with my DX7s too, which just play in the 3rd times.

What I did was as follow to re-bind it:
Status: Heli & TX on; Heli's LED keep flashing
1. Turn off TX
2. Turn off heli
3. Turn on heli, & wait the LED flashing for binding
4. Press TRAINER button and turn on TX. (all program swithes at position 0)
5. watch the display showing TRANSMITTING......then release TRAINER button.
6. move RUDDER to extreme right; waiting the heli to confirm BIND; i.e. heli's LED light up.

If that's failed after step 6, restart from step 1 again.
I finally rebind it on my 2nd tried.
BTW, I am sorry that English is not my native language; hope you can understand.