Register Now

bobbyshafter · 11-29-2011, 04:48 PM

Will the pro canopy fit the esp ?

quantummodz · 11-29-2011, 06:31 PM

would not think so as esp has a clip and 2 mounts and it looks like pro canopy has 4 mounts but i would think if you where good at modfiying it could be done. go with a fusuno much more choice and no modifying required.

gimbles · 11-30-2011, 04:16 AM

You can make anything fit, the deference is making it look neat, spend the time and examine the deference between two. I would say getting four canopy mounts and drilling some new holes would do the trick. Be sure to do a mock up.

SethKillian · 11-30-2011, 03:20 PM

on my esp i took those clips off the bottom frame, and added canopy mounts at my battery tray like the efl pro. you can use trex 550 canopy posts and put them on the battery trey towards the nose and use a pro canopy. it looks like it just doesnt have as high of an arch cut out in the sides otherwise i think it'll fit. but i'd love to see a picture of one when somone does it.

11-29-2011, 04:48 PM	#1 (permalink)
bobbyshafter Join Date: Sep 2008	pro canopy on esp Will the pro canopy fit the esp ?

11-29-2011, 06:31 PM	#2 (permalink)
quantummodz Registered Users Join Date: Mar 2011	would not think so as esp has a clip and 2 mounts and it looks like pro canopy has 4 mounts but i would think if you where good at modfiying it could be done. go with a fusuno much more choice and no modifying required. __________________ "You can only achieve 95%. If you setup within the fixed physical or mathematical limits of your model."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-30-2011, 04:16 AM	#3 (permalink)
gimbles Join Date: Oct 2011	You can make anything fit, the deference is making it look neat, spend the time and examine the deference between two. I would say getting four canopy mounts and drilling some new holes would do the trick. Be sure to do a mock up.

11-30-2011, 03:20 PM	#4 (permalink)
SethKillian Registered Users My HF Map location Join Date: Apr 2010	on my esp i took those clips off the bottom frame, and added canopy mounts at my battery tray like the efl pro. you can use trex 550 canopy posts and put them on the battery trey towards the nose and use a pro canopy. it looks like it just doesnt have as high of an arch cut out in the sides otherwise i think it'll fit. but i'd love to see a picture of one when somone does it.

Register Now

Log-in