Register Now

arturoo1977 · 01-27-2011, 11:03 AM

Hi all, I have a dumb question. When you use 2x 3s batteries, who do you fix upper battery?
Is there an upper battery tray accesorie?

Thanks

PTcaflyer · 01-27-2011, 01:20 PM

...Just put a large piece of smooth Velcro on top and use 4 straps...
Same for bottom...
PT

arturoo1977 · 01-27-2011, 03:20 PM

Thing is where top battery goes, there is only both frame side edges. I can make a plate or something to fill that empty space between frames sides but should not glue it in case frame needs to be set appart.
Just wanted to be sure about this.

Thanks

Mikej · 01-27-2011, 03:25 PM

When I used the plastic fantastic frame I used these http://www.readyheli.com/CHP-G071-Cu...y_p_32274.html - I have a couple of sets if you want to buy some ......

PTcaflyer · 01-27-2011, 03:44 PM

...Those look cool Mike !

I'm too cheap to pop for something like that...I just drape the velcro over the edges on top a little bit and it stays in place when I remove the batteries( with nearly full length fuzzy side on them).
Batteries are so big they wouldnt fit inside the frames anyway...
PT

Mikej · 01-27-2011, 03:49 PM

Yeah - they're not cheap, but they worked really well - believe me, the batteries were going nowhere !!!!

01-27-2011, 11:03 AM	#1 (permalink)
arturoo1977 Registered Users Join Date: Oct 2010	Upper battery tray Hi all, I have a dumb question. When you use 2x 3s batteries, who do you fix upper battery? Is there an upper battery tray accesorie? Thanks __________________ Arturo HK450V2, HK450Pro, GAUI Hurri425

01-27-2011, 01:20 PM	#2 (permalink)
PTcaflyer HF MR Support Join Date: Aug 2008	Upper Batt. Area ...Just put a large piece of smooth Velcro on top and use 4 straps... Same for bottom... PT __________________ Gaui 550(Need GOT ONE!) / KK2.1.5 steveis pro/ZMR250 / Alien 450 camera ship / HJ 450 all W/KK2.1.5 Steveis pro Estes Nano/ Hubsan X4 / Syma X1 AMA 953414 CONTRIBUTOR, TEAM LAVAQUAD

01-27-2011, 03:20 PM	#3 (permalink)
arturoo1977 Registered Users Thread Starter Join Date: Oct 2010	Thing is where top battery goes, there is only both frame side edges. I can make a plate or something to fill that empty space between frames sides but should not glue it in case frame needs to be set appart. Just wanted to be sure about this. Thanks __________________ Arturo HK450V2, HK450Pro, GAUI Hurri425

01-27-2011, 03:44 PM	#5 (permalink)
PTcaflyer HF MR Support Join Date: Aug 2008	...Those look cool Mike ! I'm too cheap to pop for something like that...I just drape the velcro over the edges on top a little bit and it stays in place when I remove the batteries( with nearly full length fuzzy side on them). Batteries are so big they wouldnt fit inside the frames anyway... PT __________________ Gaui 550(Need GOT ONE!) / KK2.1.5 steveis pro/ZMR250 / Alien 450 camera ship / HJ 450 all W/KK2.1.5 Steveis pro Estes Nano/ Hubsan X4 / Syma X1 AMA 953414 CONTRIBUTOR, TEAM LAVAQUAD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-27-2011, 03:25 PM	#4 (permalink)
Mikej Registered Users Join Date: Feb 2007 Location: England	When I used the plastic fantastic frame I used these http://www.readyheli.com/CHP-G071-Cu...y_p_32274.html - I have a couple of sets if you want to buy some ......

01-27-2011, 03:49 PM	#6 (permalink)
Mikej Registered Users Join Date: Feb 2007 Location: England	Yeah - they're not cheap, but they worked really well - believe me, the batteries were going nowhere !!!!

Register Now

Log-in