START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Castle Creations ESC and Software Castle Creations ESC Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
02-07-2016, 04:12 PM | #1 (permalink) |
Registered Users
Join Date: Sep 2012
|
Edge 100 over current beeps
Hi guys,
I am running an Edge 100 in my goblin 500 and I am struggling with over current beeps after landing. Setup is as follows: Goblin 500 SAB 500mm main blades CC Edge 100 ESC CC Bec Pro KDE 550XF 1200G3 Ikon flybarless 19 tooth pinion I am using the CC governor set up IU2 2700rpm. I set the ESC to insensitive but it is still giving me warnings?? I then set the governor gain to high and flew a flight without warning beeps. Next flight I got the over current beeps. Am I on the right track? Should I continue to up the gain in a custom way or is my mechanical set up wrong? Thanks in advance for any advice🚁🚁
__________________
Goblin 700 Competition, Raw 580, DX9 Black Edition "I never make mistakes, I thought I did once but I was mistaken" |
Sponsored Links | |||
Advertisement |
|
02-07-2016, 06:21 PM | #2 (permalink) |
Registered Users
Join Date: Nov 2012
|
You're mechanical setup (gearing) is perfect for 2700. I would guess your esc is just slightly undersized for that motor + whatever collective pitch you are running.
What I suggest is set up the Ikon gov because I have seen much higher peaks from the cc gov vs the Ikon gov. This is because the cc gov is reactive and the Ikon (or any fbl) gov is proactive, able to add throttle before it sees an rpm drop. Besides that, the Ikon gov is just better than the cc gov.
__________________
Protos Max Leggero 700, Logo 600SE, Blade 230s DX9 |
02-08-2016, 04:51 AM | #3 (permalink) |
Registered Users
Join Date: Sep 2010
Location: Central Illinois, USA
|
A smaller pinion or less max pitch is the cheapest solution.
|
02-08-2016, 12:38 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Sep 2012
|
Thanks for the replies guys👍
I am running 12.5 degrees of pitch pos and neg. I do not fly 3D only big air sport. I was running the Quantum Goblin edition 1200kv for a while and I was getting the same over current beeps. I switched to the KDE thinking it would run a bit more efficient. I have looked at the logs but honestly I don't understand what I am looking at. I will see if I can post a saved log for the people that understand the graphs. Cheers
__________________
Goblin 700 Competition, Raw 580, DX9 Black Edition "I never make mistakes, I thought I did once but I was mistaken" |
Thread Tools | |
Display Modes | |
|
|