Trex 450 Manuals

[Finless]

NEW! Here is the Trex450 Sport Manual. Thanks to Matt.
Align Trex 450 Sport Manual (46 Megs)

Here is the Trex450 Pro manual
Align Trex 450 Pro Manual (8 Megs)

Here is the V2 Manual in PDF High Resolution 20 megs
Align SE Version 2 PDF Manual High Rez (20 Megs)

Here is the V1 / 1.5 manual
Align SE Version 1 / 1.5 PDF Manual High Rez (4.5 Megs)

Here is the SA Arf manual (Thanks to HF user Stockracing for providing this)
Align SA ARF PDF Manual High Rez (4.5 Megs)

Here is the Trex450 XL HDE manual
Align Trex 450 XL HDE Manual (9 Megs)

Here is the Trex450 XL CDE (CCPM) manual
Align Trex 450 CDE Manual (16 Megs)

Bob

[DominicD]

I guess this is faster than crashing and repairing them enough to memorize the manuals :guzzle

[TheBum]

Thanks for posting these. I'm a newbie and just purchased an RC-TEK Diablo, which comes without a manual (RC-TEK keeps saying that they're working on one). However, since the Diablo is derived from the T-Rex 450, I can find a lot of pertinent information in these manuals.

[Oldboy]

Good sticky.

[zurie]

Is it possible to get a up-to-date manual for the TREX 450 v2... ? the manual listed above is not correct... it is missing numerous pages and the diagrams are not the same part # to diagram key as the original manual... (not a big deal, but makes refrencing the hardcopy manual with someone looking at it online impossible)

[BARRRICK]

Got a REAL SOLID REASON to recomment either JR285 s OR HS65 MG ??????????????????????. It seems there is a 50/50% selectivity split between the two. Some say 65s are better. The TREX MANUAL itself recommends the JR285s. I already have the JR package ( 285 + 3400G) but the ambiguity is murdlerizing me. Spent a bunch on the rest of the stuff (top end , all the rest )
Any offers ?
thankxxxxxxxxxxxxxxx

[Finless]

By request I just added the 450 XL HDE and CDE manuals.

Bob

[Crash-n-Hard]

Hi Guys,...
I just bought a Trex 450SE v2 last week or so but my manual is a little different than what is posted.

On my last page it shows and gives the bolts, nuts, shaft, bearing dimensions.
I'm going to try and scan it and post here for you. I already found it useful during the build.

CNH

[Crash-n-Hard]

I scanned thru the thread quickly to see if anyone had already posted this or not and i didnt see it.

I noticed that there were a few differences between the Trex 450SE v2 Manual that you have listed and the one that I received in my box I received last week.

Mine is the June 2007 Edition. I've scanned the Parts Section of the Manual which included a page that give measurements to the Nuts, Bolts, Screws, Ball Bearings, Shaft Sizes ETC,... So i just wanted to post it incase someone was interested in the updated JUNE 2007 Parts Section.

Take Care.
Hopefully this will help someone else out as well.

Download PDF File Below:
(Trex 450SE v2 June 2007 Parts Manual PDF Format HI-Rez)

CNH A.K.A. Jim

[Parkie]

My first "real" heli, it's a 450S and I've managed to leave the manual behind at one of numerous hotels I've been at in the last couple of weeks. Has anyone got a copy that I could have or could someone tell me which is the nearest variant?

Thanks

[glucoseboy]

Originally Posted by Parkie

My first "real" heli, it's a 450S and I've managed to leave the manual behind at one of numerous hotels I've been at in the last couple of weeks. Has anyone got a copy that I could have or could someone tell me which is the nearest variant?

Thanks

The 450SA is an ARF version of the 450S so it should work just fine (and it's at the top of the thread!)

[MartinS819]

Well, the SA is the ARF version, so the manual will skip a lot of the build. The V1/1.5 is about the same heli, just with aluminum frames and plastic components instead of the nice blue alu. Go with the 1/1.5 manual for your build and have a ton of fun!

-Marty

[littleflyer]

Parkie - I too have an S model. Well she used to be anyways
I have the parts pages scanned but not the whole manual. Do you want the entire thing? If you do give me till next week cause i am off tomorrow but i can get it to you.

[cds1998]

好东西，正在下载！

[ED the HEAD]

hi all,
I have a 450 SE GF combo version manual pdf format, don't if it might be usefull to others, how can I upload somwhere?

[Maxih]

Hi there. Hoping someone can help.

Just bought a spotless second hand 450 but not sure which one.

It would appear to be all plastic with yellow stabilizers & Landing gear. Has motor but no servos, gyro, esc, manuals, etc... Has carbon blades but i assume this was an after purchase addition.

I'm guessing this is the base level entry version but which one. I know next to nothing about Trexs & want to find the right manual to start my learnin..

Which model is the base? Is this the XL? Is it CDE or HDE (Whatever they are!!)

Hoping someone can get me started on the right track. This will be a casual build-up while i use my Blade 400 for learning to fly..

All advice appreciated - Maxih

[Maxih]

Is anyone going to give a newb a hint?:o

[DominicD]

Photo would be nice, nothing you told us helps us distinguish them apart.

[Maxih]

Believe it's a XL CDE. Seeking second opinions tho.
Have dyed all the yellow bits black for a cleaner look. Apparently the canopy is not the original. Previous owner added a fiberglass one before losing interest and selling it on. Am waiting to see if he has the manual or any other bits.

In any case here a coupla pics..

[DominicD]

Dang thats an OLD kit. I looks like you are right about it being an XL CDE.