Blade Nano 3d fpv better than the whoop aka inductrix

[tntburnett]

Hello Famliy Its been awhile

I had to pull out the old Nano 3D qx
I think imo the blade Nano QX 3D is better than the tiny whoop.

1 it already comes with 8mm motors.

2 It can flip and roll.

3 its only $59.
so their is really no need to upgrade unless you want to.

4 if you want to pratice invert fpv you can with this lil guy just saying whoop cant do that

IMO

This is a short video

Blade Nano QX 3d FPV better than the Whoop (4 min 39 sec)

Be Blessed
Isaac

[jebie79]

How did you mount the cam?

[Pard]

Cool Idea. What did you do to mount the camera and provide power to it? I see you also converted the QX3D from a pusher to a tractor configuration. I have done the same on mine.

I just picked up the Inductrix BNF:
https://www.amainhobbies.com/blade-h...lh8580/p531820

and a set of Goggles:
http://www.horizonhobby.com/product/...king-spmvr1100

The Inductrix is great indoors but lacks power for outdoor winds. I like the idea of putting the camera on the QX3D.

That has plenty of power for outdoor flying.

Found this:

Blade Nano QX 3D | FPV Set Up and Flight (6 min 6 sec)

Nano qx 3d fpv (2 min 56 sec)

Blade Nano QX 3D (one with FPV Camera) Review and Demo (11 min 58 sec)

[Pard]

Here is my solution. I mated an inductrix camera and canopy with a modified Nano 3D. Great fun.

[jebie79]

Looks good. How does it fly?

[Pard]

Originally Posted by jebie79

Looks good. How does it fly?

I love it. Plenty of power for outdoor flying.

The stock inductrix is just too underpowered.

The Nano 3D has 7mm motor instead of 6mm on the inductrix, so it handles the weight of the camera much better.

When I get better at the FPV thing, I will be able to fly inverted FPV!

[jebie79]

Im waiting until i get better too. Right now the stock inductrix fpv is ok for me. Im working on acro mode and then plan to tackle this project and go for 3d. I can fly 3d heli pretty good but through the goggles its like starting over.

[tntburnett]

Originally Posted by jebie79

How did you mount the cam?

I'm sorry I haven't been on here in a while.. But I basically just got glued it down... Be blessed

Originally Posted by Pard

Here is my solution. I mated an inductrix camera and canopy with a modified Nano 3D. Great fun.

Yours looks great... Be blessed

Sent from my SM-N920V using Tapatalk