Register Now

TomRex · 12-20-2008, 05:49 PM

Almost repaired again, this is a before and after shot of the canopy after a new paint job and repair after a crash the day before, the sticker hides a chip. Rustolium Neon and Testors clear coat puff cans!

ChrisH · 12-20-2008, 07:06 PM

Quote:

Originally Posted by TomRex

Almost repaired again, this is a before and after shot of the canopy after a new paint job and repair after a crash the day before, the sticker hides a chip

How do you like the Maniac blades?

TomRex · 12-21-2008, 07:57 AM

They have a good amount of pop and stop, in the one pic you can see them on the table top all broken

JEB123 · 12-21-2008, 11:38 AM

Quote:

Originally Posted by aseejr

Here is my 450SEV1 with a 5 bladed head from Heli Direct (I received yesterday). Going to try flying it today, and if it does, a 500 fuse from HeliArt is going on.

Hey, are those regular blades? Don't they make narrower blades for multi-heads like the full scale ones? Isn't five regular sized blades too much load, or do you just fly at lower RPM with more lift? That would kind of defeat the purpose of multi-head which is for greater RPM which increases stability.

JEB123 · 12-21-2008, 11:40 AM

oops, quoted myself instead of editing!

mayawork · 12-21-2008, 09:02 PM

My T-Rex 450 SE V2 and T-Rex 250

Slyster · 12-21-2008, 10:17 PM

Yeah!... I can finally post a T-Rex vid for the first time. Just hovering around a bit in the gym.. nothing fancy.. especially since I hand JUST crashed my B400 just 10 minutes before this video.. was doing rolls and and got too low. Surprisingly low damage.. just 1 blade, blade grip and main shaft. Smooth gym floor helps.. didn't even strip the main gear.

2nd time ever flying indoors.. couldn't believe how nervous I was.. I need a LOT more gym time.. especially living here in MN.

jefierro · 12-22-2008, 01:50 AM

here is mine

enoel · 12-22-2008, 03:39 PM

MicroHeli Low Profile Landing Gear

blahblah9 · 12-23-2008, 07:18 PM

Well what little bit you flew it in the gym, how did it fly compared to the blade400 besides not being as twitchy? Bye the way very nice flyin their looked nice stable and controlled

Slyster · 12-23-2008, 08:08 PM

It was good!.. very sluggish but I know why now.. did you hear the sound! Stunning compared to the B400. Was so cautious as I just had the b400 roll crash. Next Sat is another gym day and it will be all tuned up by then and I'll try to fly around more in circuits etc.

mayawork · 12-24-2008, 10:16 AM

Santini · 12-25-2008, 10:48 AM

Sly, is your tracking ok? Hard to tell from the video, but it didnt look spot on and sometimes you can "hear" it. At least that was my impression.. Good luck.

Slyster · 12-25-2008, 02:12 PM

The Great Santini is correct!

It was off by nearly 1/2 inch... I just didn't bother since I was just going to hover it for "a few seconds" which turned into minutes. Fixed now however.

perhe · 12-27-2008, 12:45 AM

my heli

Click image for larger version

Name: DSCF6457.jpg
Views: 270
Size: 112.3 KB
ID: 73898

Click image for larger version

Name: DSCF6459.jpg
Views: 189
Size: 163.3 KB
ID: 73899

Paul99 · 12-27-2008, 06:35 AM

Here's mine

Scraggy · 12-27-2008, 05:32 PM

Not long been in the air made from spare parts........

sugiyonohalim · 12-27-2008, 11:07 PM

this trex 450 se v2 and trex 600 nitro is very ugly??
no maintenance due to lazyy?? hohoho

The Steve-O · 12-27-2008, 11:39 PM

The 600's dragon is sweet!

e30ernest · 12-28-2008, 06:41 AM

Quote:

Originally Posted by Scraggy

Not long been in the air made from spare parts........

Nice pic! I love the way you mounted your ESC. I might copy it.

12-20-2008, 05:49 PM	#1001 (permalink)
TomRex Registered Users My HF Map location Join Date: May 2006	Almost repaired again, this is a before and after shot of the canopy after a new paint job and repair after a crash the day before, the sticker hides a chip. Rustolium Neon and Testors clear coat puff cans! Attached Thumbnails __________________ How much past 200 mph do I need to go you ask? Last edited by TomRex; 12-25-2008 at 10:22 AM..

12-21-2008, 07:57 AM	#1003 (permalink)
TomRex Registered Users My HF Map location Join Date: May 2006	They have a good amount of pop and stop, in the one pic you can see them on the table top all broken __________________ How much past 200 mph do I need to go you ask?

12-21-2008, 11:40 AM	#1005 (permalink)
JEB123 Registered Users Join Date: Mar 2008	oops, quoted myself instead of editing! __________________ Spektrum DX6i, TRex 450SE V2 black , Scorpion 2221-8, Heliartist N23CP Hughes500D TRex 450SE V2 silver, Scorpion 2216-12, w/Spidergear, DarthDark Hughes300C, Blade MCX, HK-450, Cessna 182 foamie, 2 AR6100 -------------------------------- If it ain't broke, fly it...

12-21-2008, 09:02 PM	#1006 (permalink)
mayawork Registered Users Join Date: Aug 2007	My T-Rex 450 SE V2 and T-Rex 250 __________________ Align T15 \| Futaba 18MZ WC

12-21-2008, 10:17 PM	#1007 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	First T-Rex video for me Yeah!... I can finally post a T-Rex vid for the first time. Just hovering around a bit in the gym.. nothing fancy.. especially since I hand JUST crashed my B400 just 10 minutes before this video.. was doing rolls and and got too low. Surprisingly low damage.. just 1 blade, blade grip and main shaft. Smooth gym floor helps.. didn't even strip the main gear. 2nd time ever flying indoors.. couldn't believe how nervous I was.. I need a LOT more gym time.. especially living here in MN. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

12-22-2008, 01:50 AM	#1008 (permalink)
jefierro Registered Users My HF Map location Join Date: Nov 2008	here is mine Attached Thumbnails

12-22-2008, 03:39 PM	#1009 (permalink)
enoel Registered Users Join Date: Apr 2008	Low Profile MicroHeli Low Profile Landing Gear Attached Thumbnails

12-23-2008, 07:18 PM	#1010 (permalink)
blahblah9 Registered Users Join Date: Mar 2008	Well what little bit you flew it in the gym, how did it fly compared to the blade400 besides not being as twitchy? Bye the way very nice flyin their looked nice stable and controlled

12-23-2008, 08:08 PM	#1011 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	It was good!.. very sluggish but I know why now.. did you hear the sound! Stunning compared to the B400. Was so cautious as I just had the b400 roll crash. Next Sat is another gym day and it will be all tuned up by then and I'll try to fly around more in circuits etc. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

12-24-2008, 10:16 AM	#1012 (permalink)
mayawork Registered Users Join Date: Aug 2007	__________________ Align T15 \| Futaba 18MZ WC

12-25-2008, 10:48 AM	#1013 (permalink)
Santini Registered Users My HF Map location Join Date: May 2006	Sly, is your tracking ok? Hard to tell from the video, but it didnt look spot on and sometimes you can "hear" it. At least that was my impression.. Good luck. __________________ "The Great Santini" Futaba 8FHGS; Logo 600 3D FBL:, 4035-500, 12T, 12S, Jive80+HV, Futaba 6203SB, Fullsize V-Bar 5.1pro (Vergnugenstabi), BLS 451+251; Align 500esp: TracX FBL, 14T, ICE75, Beastx v3

12-25-2008, 02:12 PM	#1014 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	The Great Santini is correct! It was off by nearly 1/2 inch... I just didn't bother since I was just going to hover it for "a few seconds" which turned into minutes. Fixed now however. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

12-27-2008, 12:45 AM	#1015 (permalink)
perhe Registered Users Join Date: Aug 2008	here is my copterx/align my heli

12-27-2008, 06:35 AM	#1016 (permalink)
Paul99 Registered Users Join Date: May 2006	Here's mine

12-27-2008, 05:32 PM	#1017 (permalink)
Scraggy Registered Users My HF Map location Join Date: Dec 2008	I call her Shark face....... Not long been in the air made from spare parts........ Attached Thumbnails

12-27-2008, 11:39 PM	#1019 (permalink)
The Steve-O Registered Users Join Date: Sep 2008	The 600's dragon is sweet! __________________ Blade Cp, T-Rex 450 Se V2.75 (mikado head, beam swash and tail, 7200BX), Airwolf 450sa, Blade mCx, mCPx, mSR, Cx2, Swift, Havoc Heli

12-27-2008, 11:07 PM	#1018 (permalink)
sugiyonohalim Registered Users Join Date: Dec 2008	ugly ?? this trex 450 se v2 and trex 600 nitro is very ugly?? no maintenance due to lazyy?? hohoho Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in