Register Now

Socal500 · 03-16-2012, 08:35 AM

I rewired my 450 Pro and relocated the Ice Lite 50 inside the frame, under the battery tray. Has anyone tried this location and if so how has it worked out? My main concern was ESC touching the edge of the frame. I sanded the inside edge of the slots so there are no sharp edges and also doubled up on the heatshrink where the positive / negative wires are soldered to the ESC.

dodgeboy · 03-16-2012, 08:44 AM

i think thats where most people mount it. thats where i have mine and ive had no issues.

Spork01 · 03-16-2012, 10:34 AM

mine is mounted there also. never had a problem

03-16-2012, 08:35 AM	#1 (permalink)
Socal500 My HF Map location Join Date: Nov 2007	Ice Lite 50 mounted inside frame I rewired my 450 Pro and relocated the Ice Lite 50 inside the frame, under the battery tray. Has anyone tried this location and if so how has it worked out? My main concern was ESC touching the edge of the frame. I sanded the inside edge of the slots so there are no sharp edges and also doubled up on the heatshrink where the positive / negative wires are soldered to the ESC. Attached Thumbnails

03-16-2012, 08:44 AM	#2 (permalink)
dodgeboy Registered Users Join Date: Nov 2011	i think thats where most people mount it. thats where i have mine and ive had no issues. __________________ Empire Hobby/ Team Gaui USA -- Rcbearings.com -- Cyclone Blades -- Team KDE -- A-Main Hobbies -- OMG servos

03-16-2012, 10:34 AM	#3 (permalink)
Spork01 Fear the Spork!! Join Date: Mar 2008	mine is mounted there also. never had a problem __________________ Trex 450L, OMP M2, Futaba 14SG

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in