Register Now

fjoe · 10-01-2014, 10:09 AM

What are type of screws does the Atom use?

TheBum · 10-01-2014, 01:20 PM

The machine screws are mostly cap head hex. I don't remember if there are any pan head hex screws; if there are, there are very few of them. The tray screws (battery and gyro if using the CF gyro tray) are flat head Phillips. The self-tappers are Phillips.

fjoe · 10-01-2014, 03:11 PM

Ya most are hex, but the ones that go in to plastic are not, landing gear, etc. I was unsure and a Google search did not show too much.

Thanks bum!

10-01-2014, 10:09 AM	#1 (permalink)
fjoe Registered Users Join Date: Aug 2011	JIS or phillips pan heads What are type of screws does the Atom use? __________________ Mcpx Dbl Brushless \| 1̶3̶0̶X̶ \| 180CFX \| Warp 360 \| Atom 500 \| BD-3SX \| DX8 AMA 1040965

10-01-2014, 01:20 PM	#2 (permalink)
TheBum HF Support My HF Map location Join Date: Jul 2007	The machine screws are mostly cap head hex. I don't remember if there are any pan head hex screws; if there are, there are very few of them. The tray screws (battery and gyro if using the CF gyro tray) are flat head Phillips. The self-tappers are Phillips. __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12) Graupner MZ-32 Experience is something you gain only after you need it. I wouldn't mind social media so much if it didn't involve people.

10-01-2014, 03:11 PM	#3 (permalink)
fjoe Registered Users Thread Starter Join Date: Aug 2011	Ya most are hex, but the ones that go in to plastic are not, landing gear, etc. I was unsure and a Google search did not show too much. Thanks bum! __________________ Mcpx Dbl Brushless \| 1̶3̶0̶X̶ \| 180CFX \| Warp 360 \| Atom 500 \| BD-3SX \| DX8 AMA 1040965

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in