START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
600 Class Electric Helicopters 600 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
07-11-2015, 05:11 PM | #21 (permalink) | |
Registered Users
Thread Starter
Join Date: Jul 2015
|
Quote:
|
|
Sponsored Links | |||
Advertisement |
|
07-15-2015, 07:05 AM | #22 (permalink) |
Registered Users
Join Date: Aug 2008
|
http://www.western-robotics.com/WRL-HBECLE
I use this one on 6V supply with a 2S 3000Mah with no issues.
__________________
T-Rex600-ICE100,WR10ABEC,Scorp4025-1100+17T,Kasama head,QUK Swash CNC Tail,G-Force blocks,3152,DS760+BLS251,DX7+AR7000,FM. Blade400-CC ICE50,Scorp2221-8+12T,Sonix Head&Tail,5A BEC,HS65HB,Quark+3500G,AR7000,Align Carbon blades,TRex500 Skids,Flymentor. |
07-20-2015, 03:57 PM | #23 (permalink) | |
Registered Users
Thread Starter
Join Date: Jul 2015
|
Quote:
Although Im going to scrap the 600 and move up to a 700 I know how Im going to setup Anyone needs a 600 frame, head, blades, motor, and esc I will be selling it soon to fund my 700. Only things it will be missing are servos and receiver/gyro |
|
07-27-2015, 01:43 AM | #24 (permalink) |
Registered Users
Join Date: Jul 2013
|
yep 2s life pack works perfectly. I used to run a 2s lipo with the align bec and someone told me they aren't very reliable so instead of a beefier bec I just use straight life. Less things to go wrong. I can get about 4 flights out of a 1450mah pack. Run a lead to your receiver and one to your fbl unit as it can divide up some of the amp load instead of all the amp draw on one lead.
|
07-27-2015, 08:50 AM | #25 (permalink) | |
Registered Users
Thread Starter
Join Date: Jul 2015
|
Quote:
|
|
08-03-2015, 11:33 AM | #26 (permalink) |
Registered Users
Join Date: Apr 2010
|
This is what I am using on my T600 Pro and have had no issues with it in over 3 years. You can set it for 6v, and just tie it to your pos and neg wires/connectors off your ESC. It's not cheap but it will be less than one major crash rebuild.
http://www.amain.com/rc-helicopters/...hbecs7/p275316 I would also recommend using a Deans or an EC3 if you run the 2s lipo. The JST just doesn't carry enough current. With either the Deans or the EC3, you can solder both of your output leads into the connector and not just have everything going through a one wire output to a "Y". Much better setup going through the connector.
__________________
Specter 700, Logo 700, Logo 690SX, Goblin 700, Trex 700DFC, Gaui X7, Trex600EFL Pro, Trex 600 ESP, Trex 500 ESP, DJI 550 Amain Hobbies Team Rep |
Thread Tools | |
Display Modes | |
|
|