START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
10-17-2014, 12:59 PM | #1 (permalink) |
Registered Users
Join Date: Jul 2011
|
vbar gov nitro
Hey guys,
First nitro with vbar. Now that I am able to see my HS in the software. Is there anyway to get that constant HS with out running a Flat curve ? Am I correct to understand that I am unable to run a V curve in my transmitter as a fail safe. using 14sg any help is greatly appreciated thanks Last edited by DIPswitch; 10-21-2014 at 03:57 PM.. |
Sponsored Links | |||
Advertisement |
|
10-17-2014, 02:07 PM | #2 (permalink) |
Registered Users
Join Date: Dec 2006
|
Just enter 8.4 that is 8 dot 4 or 8 period 4 whatever you understand.
|
10-17-2014, 02:28 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jul 2011
|
thats what I was thinking since it accepted that value. (8.4) just making sure.
thanks |
11-01-2014, 07:13 PM | #4 (permalink) |
Registered Users
Join Date: Sep 2009
|
You set fail safe v-curve in the VBar software. In the Governor panel(on the main screen). There 3 menus, you want to select the middle options is the throttle curve fail safe that the VBar will use in the event of sensor failure. You can adjust to your needs!
Good luck |
Thread Tools | |
Display Modes | |
|
|