Novus 200 FP / Help to Adjust E-Board

[FiraSs]

Hi

I have Novus™ 200 FP EP 2.4GHz RTF


and i changed the E-Board
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXBPCH

But now the remote does not work with the Novus™ 200 after changing the E-Board !!
What should I do to solve this problem ?

How can i Adjust Remot with E-Board ?

Thanks ..

[GORDYMONSTER]

I don't know where or what heli it was , but the reverse procedure was done to bind the heli. And what I mean is to plug the battery in on the heli, first. And then turn on the radio. It can't hirt it and If it does not work , contact the guys at 217-398-8907 or e-mail at helihotline@hobbico.com, and please post it here, once you found out for sure so the rest of us can get rescued when we might need to know.

[FiraSs]

Hi GORDYMONSTER

i send e-mail to helihotline@hobbico.com before two days
and Reply to email yesterday

This is the answer

To link the Transmitter and the Receiver for the Novus 200, hold the Aileron trim button (below the right stick) to the left and then turn on the transmitter. You should see "S - H" on the display. When you connect the battery to the receiver, it should link within 5 seconds

Now everything is fine .

[Powerply909]

Good info to know in case I ever need to replace my esc, thanks.

[Flyonthewall]

Thanks FiraSs