START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
JR and Spektrum Radios and Electronics JR and Spektrum Radios, Gyros, Servos, Etc. |
|
LinkBack | Thread Tools | Display Modes |
06-17-2015, 07:10 AM | #1 (permalink) | ||
Registered Users
Join Date: Mar 2008
|
Jr pcm9xII gyro gain setup via flightmode switch for V-bar mini-v.
O.K. So the tx is calibrated to the mini-v and the a setup via the software.
I watched a setup vid from Ready-Heli
A snag I hit was trying to set up the gyro gain via the flight mode switch. ( 3 position switch) and have the gains move on the mini v software screen. I did manage to set it up via the gain switch and the values change in the software screen when changing switch positions. ( this switch was selectable in the device select menu, but the flight mode switch wasn't.) it does mention in the tx manual ( pcm9xII) that to enable it, the the gain wire had to be plugged into the auxiliary 2 position of the rx? While having it like this though, the gains are only selectable from flight mode 0 and flight mode 1. I would prefer to have it set via the flight made switch, so I have the ability to have different gains in the different modes. I don't remember playing around with this before, but I had pro software last time. Any help gratefully appreciated. Cheers Dave.
__________________
dx3r, dx3r pro, baja 5sct shorty, hpi savage xs flux, hpi firestorm flux, axial scx10, beam E4 V2 x2, mcpx x3. |
||
Sponsored Links | |||
Advertisement |
|
06-18-2015, 06:41 AM | #2 (permalink) |
Registered Users
Thread Starter
Join Date: Mar 2008
|
Hey Guys, well after countless hours of watching youtube vids and searching Heli freak and the like, I reckon I have it nailed.
I can now have multiple tail gains through the mini-v software via the flightmode switch. In the device select menu, Select COM for rudder trim, Set Gov for out, Aux 2 - set for flight mode switch, Go back into list menu and you will notice the Governor come up in the function list, Go into the governor section and set up the required % of gain you want in the different flight modes. You will notice when moving the % round, the gains will increase or decrease in the tail gain section. Hopefully I will get it airborne this weekend. Cheers Dave.
__________________
dx3r, dx3r pro, baja 5sct shorty, hpi savage xs flux, hpi firestorm flux, axial scx10, beam E4 V2 x2, mcpx x3. |
06-18-2015, 04:50 PM | #3 (permalink) |
Registered Users
Join Date: Jun 2008
|
Very good. I guess not many that are completely familiar with that radio.
I know Im not. Blue skies.
__________________
Too many helis & Too many planks Lots of DX radios & A couple Futaba 72mhz radios AMA member & Full scale plank driver HELIFREAK !!! |
06-18-2015, 10:09 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Mar 2008
|
I think the tx is also known as the Jr 9303 overseas. It was easier finding info for it using those numbers.
Cheers Dave.
__________________
dx3r, dx3r pro, baja 5sct shorty, hpi savage xs flux, hpi firestorm flux, axial scx10, beam E4 V2 x2, mcpx x3. |
06-22-2015, 07:07 AM | #5 (permalink) | ||
Registered Users
Thread Starter
Join Date: Mar 2008
|
Hi guys, the following vid was one which helped me I recon to be able to set up different tail gains for the different flight modes on my JR PCMXII Limited Edition, or as it is alternatively known ( the JR 9303 ).
As I am only running the express software, this seemed like the only way to be able to change the gains in the mini-v software via the different flight modes on the TX.
I know the vid mentions setting up a gyro on a 6 channel RX, but this worked for me. I also watched a heap of other vids, but I believe this is the one that made things work. Cheers Dave.
__________________
dx3r, dx3r pro, baja 5sct shorty, hpi savage xs flux, hpi firestorm flux, axial scx10, beam E4 V2 x2, mcpx x3. |
||
Thread Tools | |
Display Modes | |
|
|