Need help with my 400

[Snotrod5.0]

Ok so I need help on programing the esc to the new controller

[Harbormaster]

Ok so you're gonna haveta give some information...

[nartac]

hahaha... It's like the blind is asking the blind where to go.

Like Harbormaster says, you have to give us info such as what type of esc and such. If it is a stock esc from eflite, it's not programmable. Something like Align esc, YEP, YGE, castle creations and such, there are videos on youtube available to help you as well.

[Snotrod5.0]

okay so here we go if I have the throttle hold on when I plug in the battery the blades do not move. and this is when the stick all the way down .when I take off hold the blade start to move not fast but moving . in my throttle curve is at 0 and low. so I thought the ESC needed to be programmed

[nartac]

Originally Posted by Snotrod5.0

okay so here we go if I have the throttle hold on when I plug in the battery the blades do not move. and this is when the stick all the way down .when I take off hold the blade start to move not fast but moving . in my throttle curve is at 0 and low. so I thought the ESC needed to be programmed

without knowing what your tx is, I suspect it is a dx6i. If that is correct, change your throttle hold throttle curve to 10% straight and it should fix it. It's just a "bug" of dx6i. Nothing is wrong with esc.

Again, you are not giving us much info but that is my best guess.

[Snotrod5.0]

Sorry dx7s and when the hold on they don't move it's when it's off they move with the stick all the way down

[nartac]

Originally Posted by Snotrod5.0

Sorry dx7s and when the hold on they don't move it's when it's off they move with the stick all the way down

couple of things I would do. One is to make sure you have throttle curve on throttle hold at 0% on your dx7s.

Second is to rebind the helicopter making sure that your throttle trims are at neutral and that your throttle stick is at the lowest position.

You haven't mention what brand is your esc? Some esc do require for you to calibrate your tx throttle for it to work properly (such as castle creations esc, YEP or YGE and others)

[Snotrod5.0]

It's stock esc

[Bee_random]

Or plug in before putting TH on as part of your routine. Checks (tx & heli), plug in, TH on, canopy on, timer on, go fly.