Just got a 250 trex on trade and dx6i help

[sodfarmer]

I need the settings for a trex 250 with a flybar and the dx6i. Does anyone have a link or page I could get the setting for my dx6i?

[1am7h30n3]

Originally Posted by sodfarmer

I need the settings for a trex 250 with a flybar and the dx6i. Does anyone have a link or page I could get the setting for my dx6i?

There are no one size fits all settings, you're going to have to do a proper setup from scratch. Search on youtube for flybar heli setup videos, or finless bob videos.

[sodfarmer]

I think I have the setting right but now when I try to go forward it goes backwards and vice versa. I have the aile reversed and the rudder everything else is normal. Please help

[Pilotrob]

Here is the way my Dx6i is setup in the reverse section. Elev, aile, and rudder are reversed. Throttle, gyro and pitch are normal. Mine is flybarred. I got the pitch setup first then set the rest. Hope this helps.
The gyro setting might be different on yours.

[kla912000]

Originally Posted by sodfarmer

I think I have the setting right but now when I try to go forward it goes backwards and vice versa. I have the aile reversed and the rudder everything else is normal. Please help

You might also have to adjust your swash mixes. For example, you might have something like Ail: 70, Ele: 65, Pit: -70 you can switch the Ele setting to a negative and have Ail: 70, Ele: -65, Pit: -70. This will reverse your elevator direction. Now, every setup is different so you will have to find what works for your particular setup. Find a starting point and then fine tune it.