Register Now

dalid · 06-09-2013, 12:01 AM

Had install the Deviation 3.0 firmware to see if my little parkzone plane was working, everything is fine soo

I decide to bring the original firmware back since the Deviation menu is a littlebit java style and I dont have much Blade soo I download it from walkera website and all is get back everything ok but now my USB device dont work properly. I can do everything with Dfuse and firmware update but my devo doesnt work anymore in usb mode (press ''ENT'' button than put radio ON) that allow me too add icon and re-add Deviation

is anyone can help me, seem like my mini laptop (acer aspire one) or the new walkera firware had ****top something

I already try 3 different usb wire and work fine with Dfuse soo it connect?!
I made no mistake about the download and version

FDR_ · 06-09-2013, 02:20 PM

Only the deviation fw supports the USB drive mode, the original fw does not...

dalid · 06-09-2013, 04:09 PM

Thanks a lot for anderstanding my english

dalid · 06-09-2013, 04:10 PM

So theres is no way for me to add picture icon for each of my model ?

I install Deviation and I found the background soo uggly for that kind of lcd screen and setting menu was also a pita

FDR_ · 06-09-2013, 11:15 PM

In the original fw no.

In deviation you can add icons for the models, and easily change the background too...

dalid · 06-17-2013, 04:10 PM

a Big thanks to hungary heheh

Stupid canadian I am

Everything work great I put back Deviation but this time I made some change for background and model icons and also menu icons. VERY nice transmitter, no more signal loss (Devo 7E)

I found a SuperCP library on Deviation forum and put it everything well but when I came in the menu, throttle and pitch curve menu is not working soo I it by hand haha

06-09-2013, 12:01 AM	#1 (permalink)
dalid Registered Users Join Date: Mar 2013	Devo 8s usb problem Had install the Deviation 3.0 firmware to see if my little parkzone plane was working, everything is fine soo I decide to bring the original firmware back since the Deviation menu is a littlebit java style and I dont have much Blade soo I download it from walkera website and all is get back everything ok but now my USB device dont work properly. I can do everything with Dfuse and firmware update but my devo doesnt work anymore in usb mode (press ''ENT'' button than put radio ON) that allow me too add icon and re-add Deviation is anyone can help me, seem like my mini laptop (acer aspire one) or the new walkera firware had ****top something I already try 3 different usb wire and work fine with Dfuse soo it connect?! I made no mistake about the download and version

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-09-2013, 02:20 PM	#2 (permalink)
FDR_ Registered Users Join Date: Dec 2011	Only the deviation fw supports the USB drive mode, the original fw does not...

06-09-2013, 04:09 PM	#3 (permalink)
dalid Registered Users Thread Starter Join Date: Mar 2013	Thanks a lot for anderstanding my english

06-09-2013, 04:10 PM	#4 (permalink)
dalid Registered Users Thread Starter Join Date: Mar 2013	So theres is no way for me to add picture icon for each of my model ? I install Deviation and I found the background soo uggly for that kind of lcd screen and setting menu was also a pita

06-09-2013, 11:15 PM	#5 (permalink)
FDR_ Registered Users Join Date: Dec 2011	In the original fw no. In deviation you can add icons for the models, and easily change the background too...

06-17-2013, 04:10 PM	#6 (permalink)
dalid Registered Users Thread Starter Join Date: Mar 2013	a Big thanks to hungary heheh Stupid canadian I am Everything work great I put back Deviation but this time I made some change for background and model icons and also menu icons. VERY nice transmitter, no more signal loss (Devo 7E) I found a SuperCP library on Deviation forum and put it everything well but when I came in the menu, throttle and pitch curve menu is not working soo I it by hand haha

Register Now

Log-in