Register Now

tandem4 · 08-09-2010, 02:23 AM

http://www.xheli.com/bl400codealh.html

...... at the link above, anybody has experience with them?????? Are they worth while to order and is the quality aceptable.

scott s · 08-09-2010, 03:57 AM

You can get the proven quality of the Sonix head and tail for 115.00 dollars. The sonix also has the correct tail shaft pulley as the Blade 400 use a slightly different tooth spacing on their tail gears and drive belt than other 450's. There are horror story's all thru this forum about the "other stuff" Soft alluminum, horrible machining, fit, finish and tolerances. Easily stripped screw heads and threads and on and on Go to www.cncheli.com and click on Blade400 and take a look. Why take chances, the sonix is proven!

tandem4 · 08-09-2010, 05:52 AM

Thanx for your reply. Do you know of a reputable supplie where I can make an internet purchase?

DanTheDane · 08-09-2010, 06:14 AM

This one is an option:
www.cnchelicopter.com/servlet/the-1407/Eflite-Blade-400-CNC/Detail

whoanelly · 08-09-2010, 08:42 AM

http://www.cnchelicopter.com/servlet...400/Categories

08-09-2010, 02:23 AM	#1 (permalink)
tandem4 Registered Users Join Date: May 2009	XHeli CNC Upgrades - how good are they???? http://www.xheli.com/bl400codealh.html ...... at the link above, anybody has experience with them?????? Are they worth while to order and is the quality aceptable.

08-09-2010, 06:14 AM	#4 (permalink)
DanTheDane Registered Users Join Date: Jul 2009	This one is an option: www.cnchelicopter.com/servlet/the-1407/Eflite-Blade-400-CNC/Detail __________________ Align T-rex 450L

08-09-2010, 08:42 AM	#5 (permalink)
whoanelly Registered Users Join Date: Apr 2008	http://www.cnchelicopter.com/servlet...400/Categories __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-09-2010, 03:57 AM	#2 (permalink)
scott s Registered Users Join Date: Apr 2010	You can get the proven quality of the Sonix head and tail for 115.00 dollars. The sonix also has the correct tail shaft pulley as the Blade 400 use a slightly different tooth spacing on their tail gears and drive belt than other 450's. There are horror story's all thru this forum about the "other stuff" Soft alluminum, horrible machining, fit, finish and tolerances. Easily stripped screw heads and threads and on and on Go to www.cncheli.com and click on Blade400 and take a look. Why take chances, the sonix is proven!

08-09-2010, 05:52 AM	#3 (permalink)
tandem4 Registered Users Thread Starter Join Date: May 2009	Thanx for your reply. Do you know of a reputable supplie where I can make an internet purchase?

Register Now

Log-in