Register Now

jointer · 07-20-2011, 04:42 PM

Hi Tom,
do you have any idea if the JLog will work with the new HeliJive?
It is not available yet, but the manual is online and i have a plan to use it.
If it will not work, then i will choose YGE.
Thanks.
Petr

dl7uae · 07-20-2011, 05:12 PM

Hi Petr!

Works.

Cheers. Tom

jointer · 07-26-2011, 08:35 AM

Tom, i see you implemented a new feature - RPM output for Vbar.
I was thinking about asking you if this can be done.
It cannot be tested until someone will have JLog2 and HeliJive, but i think it is nice idea.

dl7uae · 07-26-2011, 03:06 PM

Well, Uli told me that he will not have the time right now for testing of it. I should test it by myself. But, you name it, I'll need a HeliJIVE for that, will take care of it.

The question is whether an update rate of 100ms for the pulse frequency may be sufficient, given the inertia of the controlled system..?

That was just a spontaneous idea..

Tom

jointer · 07-27-2011, 03:00 AM

It might work, but i think it will not be as good as classic sensor.
The Vbar gov need to have fast feedback, to see if the applied change had any effect.
Here will be 100ms delay and the value will stay the same for next 100ms.
Need to be tested.
Would be very nice if it would work.
I am considering waiting for YGE with RPM output, but HeliJive have all i might need, so i think i will get that again. Only the prices is higher again.

dl7uae · 07-27-2011, 04:21 AM

Quote:

The Vbar gov need to have fast feedback, to see if the applied change had any effect.

Not sure.. That w'd be the V-Bar governor in a normal control loop (like JIVE's governor), reacting, not preventive acting. As I mentioned: No idea how the inertia of the control process is. Needs to give it a try..

Tom

morrolucky · 11-18-2011, 01:54 AM

Hi Tom

Jlog 2 can work with new HeliJive (Version 11)?
What I need for it except Jlog2 and HeliJive?

Thank You!

dl7uae · 11-18-2011, 03:28 AM

Yes, works.

Quote:

What do I need for it except of Jlog2 and HeliJive?

Nothing, SM#2800 (JLog2), that's all.

If you want to use JLog-own sensors (external to the JIVE), look here as well as here.

Tom

morrolucky · 11-18-2011, 03:39 AM

Thank You!!!

Magneto · 11-19-2011, 04:31 PM

The jlog is a great add on for the helijive.

07-20-2011, 04:42 PM	#1 (permalink)
jointer Registered Users Join Date: Apr 2009	HeliJive Hi Tom, do you have any idea if the JLog will work with the new HeliJive? It is not available yet, but the manual is online and i have a plan to use it. If it will not work, then i will choose YGE. Thanks. Petr __________________ - TDSF in a box... - TDR #2, Scorpion 4525LE, PowerJive, MKS HBL950/980, Vbar - TDR #1 (stock, sold at 700+ flights), e-Revo, Protos 500, Jeti DS14

07-20-2011, 05:12 PM	#2 (permalink)
dl7uae Registered Users Join Date: Feb 2008	Hi Petr! Works. Cheers. Tom __________________ Tom (j-log.eu)

07-26-2011, 08:35 AM	#3 (permalink)
jointer Registered Users Thread Starter Join Date: Apr 2009	Tom, i see you implemented a new feature - RPM output for Vbar. I was thinking about asking you if this can be done. It cannot be tested until someone will have JLog2 and HeliJive, but i think it is nice idea. __________________ - TDSF in a box... - TDR #2, Scorpion 4525LE, PowerJive, MKS HBL950/980, Vbar - TDR #1 (stock, sold at 700+ flights), e-Revo, Protos 500, Jeti DS14

07-26-2011, 03:06 PM	#4 (permalink)
dl7uae Registered Users Join Date: Feb 2008	Well, Uli told me that he will not have the time right now for testing of it. I should test it by myself. But, you name it, I'll need a HeliJIVE for that, will take care of it. The question is whether an update rate of 100ms for the pulse frequency may be sufficient, given the inertia of the controlled system..? That was just a spontaneous idea.. Tom __________________ Tom (j-log.eu) Last edited by dl7uae; 07-26-2011 at 06:02 PM..

07-27-2011, 03:00 AM	#5 (permalink)
jointer Registered Users Thread Starter Join Date: Apr 2009	It might work, but i think it will not be as good as classic sensor. The Vbar gov need to have fast feedback, to see if the applied change had any effect. Here will be 100ms delay and the value will stay the same for next 100ms. Need to be tested. Would be very nice if it would work. I am considering waiting for YGE with RPM output, but HeliJive have all i might need, so i think i will get that again. Only the prices is higher again. __________________ - TDSF in a box... - TDR #2, Scorpion 4525LE, PowerJive, MKS HBL950/980, Vbar - TDR #1 (stock, sold at 700+ flights), e-Revo, Protos 500, Jeti DS14

11-18-2011, 01:54 AM	#7 (permalink)
morrolucky Registered Users My HF Map location Join Date: Jun 2010	Hi Tom Jlog 2 can work with new HeliJive (Version 11)? What I need for it except Jlog2 and HeliJive? Thank You!

11-18-2011, 03:39 AM	#9 (permalink)
morrolucky Registered Users My HF Map location Join Date: Jun 2010	Thank You!!!

11-19-2011, 04:31 PM	#10 (permalink)
Magneto Registered Users Join Date: Jan 2010 Location: Massachusetts	The jlog is a great add on for the helijive. __________________ Last edited by Magneto; 11-19-2011 at 10:19 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in