Register Now

DominicD · 04-09-2010, 02:07 PM

I told him the other night he had to finish his 50 quick, his response was that he was reading the manual

Slyster · 04-09-2010, 02:14 PM

Can someone PM me Bills card too.. tx.

DominicD · 04-09-2010, 02:15 PM

Ok so we have 4 kits on Bill's CC so far.

R0t0R · 04-09-2010, 02:45 PM

Quote:

Originally Posted by HFG

Ok so we have 4 kits on Bill's CC so far.

Don't forget engines, electronics, etc.!

DominicD · 04-09-2010, 03:06 PM

Bill is such a generous guy he is gunna buy all the electronics too !!

LITHIUMSTATIC · 04-09-2010, 03:08 PM

Quote:

Originally Posted by HFG

Ok so we have 4 kits on Bill's CC so far.

Make it 5 and can you add a SK720 to my order?

DominicD · 04-09-2010, 03:08 PM

Wurger · 04-09-2010, 03:18 PM

Okay ill have a YS 91 engine, outrage pipe, torq servos, multigov pro, JR R921, switchglo pro and a quark gyro. Thanks Bill you're the best.

DominicD · 04-09-2010, 03:19 PM

Hehehe don't list your gear here, Lith should have an Outrage 90 Setup thread started any second

Charley Stephens · 04-09-2010, 03:22 PM

ummm cough, cough, build thread, cough hehe

mhanley · 04-09-2010, 03:23 PM

Quote:

Originally Posted by Slyster

will there be an electric version?

So what about a 90E in the next 12-18 months? If so I will pass on some of the new 90 electrics coming out and wait on an Outrage!

DominicD · 04-09-2010, 03:24 PM

Ohhh Charley I really hope the Outrage Blade factory can be up and running soon. I think selling the 90 kit with a set of CF blades would be a big deal, 700N who ?

DominicD · 04-09-2010, 03:30 PM

I will be doing a nice 90 build thread this time around, with my usual tips/hint and sense of humor mixed in. I didn't do one with the 50 because i got my kit so late (various bits of the kit arrived from 3 different states) and Lith already had a nice one.

Greg Alderman · 04-09-2010, 03:50 PM

LOL...I think Charley's "cough cough Build Thread cough cough" was his typical "nice guy" way of trying to get this thread back on track!

I am a retired Navy Chief...I am little more forward! Cut the damn nonsense!

Let Charley get back to doing the build thread!

BWAAAAAAAAA HAAAAAAAA

LITHIUMSTATIC · 04-09-2010, 04:05 PM

Proceed Charley...

DominicD · 04-09-2010, 04:24 PM

Charley what gear ratio and gear pitch will the 90 have ?

Charley Stephens · 04-09-2010, 04:54 PM

Ok to Answer a few questions

Here are some details
12mm main shaft
10mm spindle
6mm tail shaft
540 x 4mm flybar

Gear Ratio 8.2:1
Tail Ratio 4.625:1

Pinion Gear 15T 1 Mod.
Main Gear 123T 1 Mod.
Auto Gear 111T 1 Mod.
Counter Gear 24T 1 Mod.

Yes a flybarless kit will also be offered at time of release center hub design will have the spindle driver feature.

Yes a 90E is already 50% designed

HFG that is the plan is to have Axis rotor blades at time of release still not set in stone but I'm working on it

vikas · 04-09-2010, 05:15 PM

Quote:

Originally Posted by Rotorworkz

Ok to Answer a few questions

Yes a 90E is already 50% designed

WHOOOO HOOOOO

billbill242000 · 04-09-2010, 07:19 PM

Quote:

Originally Posted by Greg Alderman

LOL...I think Charley's "cough cough Build Thread cough cough" was his typical "nice guy" way of trying to get this thread back on track!

I am a retired Navy Chief...I am little more forward! Cut the damn nonsense!

Let Charley get back to doing the build thread!

BWAAAAAAAAA HAAAAAAAA

Thanks Greg...I think you just saved me a ton of money!!

billbill242000 · 04-09-2010, 07:20 PM

What exactly does the "1 Mod" mean about the gears? Is this the pitch?

04-09-2010, 02:07 PM	#81 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	I told him the other night he had to finish his 50 quick, his response was that he was reading the manual __________________ Spreading capibara awareness since 2006

04-09-2010, 02:14 PM	#82 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	Can someone PM me Bills card too.. tx. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

04-09-2010, 02:15 PM	#83 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Ok so we have 4 kits on Bill's CC so far. __________________ Spreading capibara awareness since 2006

04-09-2010, 03:06 PM	#85 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Bill is such a generous guy he is gunna buy all the electronics too !! __________________ Spreading capibara awareness since 2006

04-09-2010, 03:08 PM	#87 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	5 ! __________________ Spreading capibara awareness since 2006

04-09-2010, 03:18 PM	#88 (permalink)
Wurger Registered Users My HF Map location Join Date: Jul 2008 Location: San Diego, CA	Okay ill have a YS 91 engine, outrage pipe, torq servos, multigov pro, JR R921, switchglo pro and a quark gyro. Thanks Bill you're the best.

04-09-2010, 03:19 PM	#89 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Hehehe don't list your gear here, Lith should have an Outrage 90 Setup thread started any second __________________ Spreading capibara awareness since 2006

04-09-2010, 03:22 PM	#90 (permalink)
Charley Stephens Registered Users Thread Starter Join Date: Jul 2005	ummm cough, cough, build thread, cough hehe __________________ Charley Stephens

04-09-2010, 03:24 PM	#92 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Ohhh Charley I really hope the Outrage Blade factory can be up and running soon. I think selling the 90 kit with a set of CF blades would be a big deal, 700N who ? __________________ Spreading capibara awareness since 2006

04-09-2010, 03:30 PM	#93 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	I will be doing a nice 90 build thread this time around, with my usual tips/hint and sense of humor mixed in. I didn't do one with the 50 because i got my kit so late (various bits of the kit arrived from 3 different states) and Lith already had a nice one. __________________ Spreading capibara awareness since 2006

04-09-2010, 03:50 PM	#94 (permalink)
Greg Alderman Registered Users My HF Map location Join Date: Jul 2004	LOL...I think Charley's "cough cough Build Thread cough cough" was his typical "nice guy" way of trying to get this thread back on track! I am a retired Navy Chief...I am little more forward! Cut the damn nonsense! Let Charley get back to doing the build thread! BWAAAAAAAAA HAAAAAAAA __________________ Greg Alderman Warehouse/ Facilities Manager greg@helidirect.com

04-09-2010, 04:05 PM	#95 (permalink)
LITHIUMSTATIC Registered Users My HF Map location Join Date: May 2006	Proceed Charley... __________________ Just a guy and his heli....

04-09-2010, 04:24 PM	#96 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	Charley what gear ratio and gear pitch will the 90 have ? __________________ Spreading capibara awareness since 2006

04-09-2010, 04:54 PM	#97 (permalink)
Charley Stephens Registered Users Thread Starter Join Date: Jul 2005	Ok to Answer a few questions Here are some details 12mm main shaft 10mm spindle 6mm tail shaft 540 x 4mm flybar Gear Ratio 8.2:1 Tail Ratio 4.625:1 Pinion Gear 15T 1 Mod. Main Gear 123T 1 Mod. Auto Gear 111T 1 Mod. Counter Gear 24T 1 Mod. Yes a flybarless kit will also be offered at time of release center hub design will have the spindle driver feature. Yes a 90E is already 50% designed HFG that is the plan is to have Axis rotor blades at time of release still not set in stone but I'm working on it __________________ Charley Stephens

04-09-2010, 07:20 PM	#100 (permalink)
billbill242000 Registered Users My HF Map location Join Date: Dec 2007	What exactly does the "1 Mod" mean about the gears? Is this the pitch? __________________ All I can say is "WOW!!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in