MY NEW SAGA "TREX 800 FBL GASSER"

[kdsalas]

Charging the battery to take it to my Friend Sana for the set up, the battery is permanent there with a strap for secure the dean, I charged the battery true the Gryphon Voltage Regulator I don't need to take it out, just plug & play.

KS

[f22warzone]

is that greas on your main gear, or why is it so black

also heli is looking good would be nice to have a gaser some day but i am adicted to the power of the electric lol .... but man the flight times you may have to get a chair

[kdsalas]

Originally Posted by f22warzone

is that greas on your main gear, or why is it so black

also heli is looking good would be nice to have a gaser some day but i am adicted to the power of the electric lol .... but man the flight times you may have to get a chair

THK, Yes is grease just a little but is fine there, the power of electric are awesome take a look of my Friend Sana, the one will set up my VBAR, all them have Electric, but I like more the Gas, maybe some day I get a TREX 600e

[ame]http://www.youtube.com/watch?v=hyqAsUf9830[/ame]


KS

[Azalin]

Very nice. What conversion was that?

[kdsalas]

Originally Posted by Azalyn

Very nice. What conversion was that?

HELIBUG MERCURY 800 HB8-RC YOU CAN CALL TREX 800

http://www.helibug.com/HB8.htm


THK for Ask

KS

[kdsalas]

IS DONE !

THK TO ALL YOU LOL'S FOR LOOK


KS

[Azalin]

Cool. Do you have any flight videos?

[kdsalas]

Originally Posted by Azalyn

Cool. Do you have any flight videos?

Soon, first the VBAR set up


KS

[kdsalas]

The Working Station for the Gasser is Ready she ask me for Gasoline

THK

KS

[Rototerrier]

The gasoline is going to eat through and melt that nitro fuel line in about 5 minutes and you are risking a major fire hazard using a NITRO ONLY fuel pump.

Electric gas fuel pumps are usually very costly which is why most of us stick with manual. You need to get rid of that pump and swap out your lines with Tygon.

This is a disaster waiting.

[Bob8crow]

Glad you are about ready to fly. Yea there will be a learning curve. But you will succeed.

fred

[kdsalas]

Originally Posted by Rototerrier

The gasoline is going to eat through and melt that nitro fuel line in about 5 minutes and you are risking a major fire hazard using a NITRO ONLY fuel pump.

Electric gas fuel pumps are usually very costly which is why most of us stick with manual. You need to get rid of that pump and swap out your lines with Tygon.

This is a disaster waiting.

THK for the info, I imagine about the Nitro Line I will replace it today what size do you suggest to buy ?, what fuel pump do you recommended

I find this one: http://www3.towerhobbies.com/cgi-bin...&I=LXB889&P=0#



THK

KS

[Rototerrier]

Any hand crank pump will work. Just note the specs from the manufacturer, but most hand crank fuel pumps say gas or glow.

For instance, this one indicates for Gas and Glow:
http://grandrc.com/p17501/Ultra-Fuel...duct_info.html

But this one specifically says for nitro only:
http://grandrc.com/p17500/Manual-Fue...duct_info.html

Just have to be careful and get the right one.

[Azalin]

This is what i use. Dubro Kwik. Works for gasoline and glow fuel.

http://www3.towerhobbies.com/cgi-bin...&I=LXJGS5&P=ML

[kdsalas]

Originally Posted by Rototerrier

Any hand crank pump will work. Just note the specs from the manufacturer, but most hand crank fuel pumps say gas or glow.

For instance, this one indicates for Gas and Glow:
http://grandrc.com/p17501/Ultra-Fuel...duct_info.html

But this one specifically says for nitro only:
http://grandrc.com/p17500/Manual-Fue...duct_info.html

Just have to be careful and get the right one.

Originally Posted by Azalyn

This is what i use. Dubro Kwik. Works for gasoline and glow fuel.

http://www3.towerhobbies.com/cgi-bin...&I=LXJGS5&P=ML

OK, I will buy ones you said or I can buy this one that said Gas & Diesel and I like the style: http://www3.towerhobbies.com/cgi-bin...&I=LXB889&P=0#

But I am confuse about the Tygon line, I do not know what size will be the correctly betwin this ones : 1/8, 3/32, 5/32 I all ready have a 5mm Gas RJX Line but the inside diameter is to little and I can't used on the fitting and on the fuel pump, maybe will work on my Gasser, please let me know the right size for the fuel pump & fittings


THK 1 More Time Lol's

KS

[Rototerrier]

yes, the six shooter will work. And you can use 1/8 tygon. You can also use cheaper non tygon line like the stuff sold by Daves. It is cheaper but not quite as flexible. But again...it is way cheaper.

[Azalin]

Originally Posted by kdsalas

OK, I will buy ones you said or I can buy this one that said Gas & Diesel and I like the style: http://www3.towerhobbies.com/cgi-bin...&I=LXB889&P=0#
KS

This one looks nice.

[kdsalas]

Originally Posted by Rototerrier

yes, the six shooter will work. And you can use 1/8 tygon. You can also use cheaper non tygon line like the stuff sold by Daves. It is cheaper but not quite as flexible. But again...it is way cheaper.

THK Lol's

KS

[kdsalas]

Originally Posted by Rototerrier

yes, the six shooter will work. And you can use 1/8 tygon. You can also use cheaper non tygon line like the stuff sold by Daves. It is cheaper but not quite as flexible. But again...it is way cheaper.

Originally Posted by Azalyn

This one looks nice.

I am waiting for some vibration gel for the electronics and next I will take my Gasser to my friend Sana for the VBAR set up, he know a lot of Electric & Nitro but I believe we don't know a lot about Zenoah Engine (G270RC).

I am wondering what HP do you suggest we need to star for my 800mm MB:

Head Speed:

Normal- ?
Idle 1- ?
Idle 2- ?

Throttle Curve:

Normal- ?
Idle 1- ?
Idle 2- ?


I read that the Nitro Curve is not the same from the Gasser Curve, let me know some suggestion and will star from there !

THK 1 More Time lol's

KS

[kdsalas]

Waiting for the GasPump......

KS