Register Now

tonyxwing · 04-26-2011, 05:04 PM

I'm interested in this heli but the only pics I have seen are the standard point of sale pics. Anyone want to share their pics of their Fusion 50 and it's setup I would love to see them.

im4711 · 04-26-2011, 06:57 PM

I am sure you will find plenty of threads in here with pictures and videos.

https://www.helifreak.com/showthread...=278995&page=4

hndaluvr · 05-12-2011, 08:56 PM

Here ya go...

OnTheSnap · 05-12-2011, 09:30 PM

Like the canopy. Looks a little awkward with the skids on backwards.

JustPlaneChris · 05-13-2011, 09:41 AM

Quote:

Originally Posted by OnTheSnap

Looks a little awkward with the skids on backwards.

I dunno, OTS... it kinda grows on you. It's sleek.

I do like the wiring job, and I think I'll follow that example with the Microbeast location on mine too.

BaconRaygun · 05-13-2011, 01:07 PM

Well... Not quite finished but my blades came in yesterday so I had a little shoot in the driveway. I am now waiting on a motor and a few miscellaneous nic-naks (servo horns and connectors.. that type of thing) to finish the build.

Carapau · 05-13-2011, 03:52 PM

Here are a couple of my setup. I have tried to keep the wiring as tidy as possible. The one addition to this heli that is not found on most others is the Emcotec power safety switch. Not a necessity but certainly a 'nice to have'. Basically, it allows you to plug in both batteries (a two handed affair) without powering up the ESC. On pulling a small magnetic plug at the back of the heli (one handed affair) power is then sent to the ESC and the heli can start up.

golf-sec · 05-14-2011, 05:14 AM

tntburnett · 05-14-2011, 07:54 PM

Here is mines. Notice the collar I have put on the main shaft keep it from sliding up and down after flights. Here is way I did it check the foum out. Enjoy. Have a blessed week.

https://www.helifreak.com/showthread.php?t=305022

tonyxwing · 05-15-2011, 12:52 AM

Nice!!!! I'm still working on my build. I will post some pics soon. I have flown strictly Align in the past but after building this Fusion, I can say I'm very impressed with this Outrage product.

Keep those pics coming fellas!!!!

Gambler · 05-15-2011, 07:13 AM

Nice pics everybody. I'll get mine up when I finish my build. One note though, there is already a larger thread with pictures.

I vote that they are merged and then stickified.

tonyxwing · 05-15-2011, 08:32 AM

Quote:

Originally Posted by Gambler

I vote that they are merged and then stickified.

I agree!.

googie · 05-16-2011, 04:18 AM

in flight......

tntburnett · 05-16-2011, 08:32 AM

Here is some more. Have a blessed week.
https://www.helifreak.com/showthread.php?t=304616

tonyxwing · 05-16-2011, 08:52 PM

Googie, that is a sweet pic!!!!

tonyxwing · 05-16-2011, 09:51 PM

Okay, I just finished my build and I'm waiting on a few electronic components before I get this bad boy in the air. But here is what I have so far.

skyfrog · 05-16-2011, 10:31 PM

Nice!!!!!

tntburnett · 05-17-2011, 07:59 AM

I say it is on the way up up and away :-). Be bless

BaconRaygun · 05-19-2011, 08:07 PM

Finally got her all wired up and set up... now all I need is for Neu to hurry up and send me my motor before I go crazy...

Looks like I have the only flybar in town.

Heechee · 05-21-2011, 03:26 PM

I started a flybar build as well!

Unfortunately for the next two weeks I can't really work on it, so it'll fly hopefully some time in June. As for those Deans connetors.. I also have Deans on my packs, on 6S, but they spark badly enough with those voltages. I will build a Y-connector that has Deans for the packs, but it'll connect to the ESC with EC5 connectors.

04-26-2011, 05:04 PM	#1 (permalink)
tonyxwing Registered Users Join Date: Jun 2009	Post Your Pics of Your Fusion 50 I'm interested in this heli but the only pics I have seen are the standard point of sale pics. Anyone want to share their pics of their Fusion 50 and it's setup I would love to see them.

05-12-2011, 09:30 PM	#4 (permalink)
OnTheSnap Registered Users Join Date: Jan 2009 Location: NorCal	Like the canopy. Looks a little awkward with the skids on backwards. __________________ Xpert Scorpion Power Systems Helidirect

05-13-2011, 01:07 PM	#6 (permalink)
BaconRaygun Registered Users My HF Map location Join Date: May 2010 Location: Longuyland, NY	Well... Not quite finished but my blades came in yesterday so I had a little shoot in the driveway. I am now waiting on a motor and a few miscellaneous nic-naks (servo horns and connectors.. that type of thing) to finish the build. __________________ ~SAB~ Goblin 700 ~Compass~ Warp 360 ~Blade~ mCP X (BL) AMA# 977012 Team BOCA Bearings

05-13-2011, 03:52 PM	#7 (permalink)
Carapau Registered Users Join Date: Jan 2011	Here are a couple of my setup. I have tried to keep the wiring as tidy as possible. The one addition to this heli that is not found on most others is the Emcotec power safety switch. Not a necessity but certainly a 'nice to have'. Basically, it allows you to plug in both batteries (a two handed affair) without powering up the ESC. On pulling a small magnetic plug at the back of the heli (one handed affair) power is then sent to the ESC and the heli can start up. Attached Thumbnails __________________ Logo 700, Logo 600, Protos 380 Evo, Trex 470L, Jeti DS-16, TT Raptor 50 nitro, couple of planks and lots of laughs

05-14-2011, 05:14 AM	#8 (permalink)
golf-sec Registered Users Join Date: Dec 2010	Attached Thumbnails __________________ walkara v1200xx fbl extrem 250 se fbl 3g esc 35a scorpion 450 pro fbl beastx cc50 scorpion 2221-8 450 pro fbl airwolf 3g scorpion 2221-8 hobbywing 60a atom 500 fbl beastx cc100

04-26-2011, 06:57 PM	#2 (permalink)
im4711 Registered Users My HF Map location Join Date: Oct 2008	I am sure you will find plenty of threads in here with pictures and videos. https://www.helifreak.com/showthread...=278995&page=4

05-12-2011, 08:56 PM	#3 (permalink)
hndaluvr Registered Users Join Date: Apr 2010	Here ya go...

05-14-2011, 07:54 PM	#9 (permalink)
tntburnett Blade Forum Support Join Date: Feb 2009	Here is mines. Notice the collar I have put on the main shaft keep it from sliding up and down after flights. Here is way I did it check the foum out. Enjoy. Have a blessed week. https://www.helifreak.com/showthread.php?t=305022 Attached Thumbnails __________________ Jesus Rep Its all Good,Its all GOD FPV Everything Now GOD BLESS

05-15-2011, 12:52 AM	#10 (permalink)
tonyxwing Registered Users Thread Starter Join Date: Jun 2009	Nice!!!! I'm still working on my build. I will post some pics soon. I have flown strictly Align in the past but after building this Fusion, I can say I'm very impressed with this Outrage product. Keep those pics coming fellas!!!!

05-15-2011, 07:13 AM	#11 (permalink)
Gambler Registered Users My HF Map location Join Date: Jan 2011	Nice pics everybody. I'll get mine up when I finish my build. One note though, there is already a larger thread with pictures. I vote that they are merged and then stickified. __________________ Outrage Fusion 50 FBL - Scorpion 4025-630, 10S, Skookum 720 HK-Tarexot 450 - 4S BeastX Spektrum DX7

05-16-2011, 04:18 AM	#13 (permalink)
googie Registered Users Join Date: Oct 2010	in flight...... Attached Thumbnails

05-16-2011, 08:32 AM	#14 (permalink)
tntburnett Blade Forum Support Join Date: Feb 2009	Here is some more. Have a blessed week. https://www.helifreak.com/showthread.php?t=304616 __________________ Jesus Rep Its all Good,Its all GOD FPV Everything Now GOD BLESS

05-16-2011, 08:52 PM	#15 (permalink)
tonyxwing Registered Users Thread Starter Join Date: Jun 2009	Googie, that is a sweet pic!!!!

05-16-2011, 09:51 PM	#16 (permalink)
tonyxwing Registered Users Thread Starter Join Date: Jun 2009	Okay, I just finished my build and I'm waiting on a few electronic components before I get this bad boy in the air. But here is what I have so far. Attached Thumbnails

05-16-2011, 10:31 PM	#17 (permalink)
skyfrog Registered Users Join Date: Jul 2009	Nice!!!!! __________________ 8s 5hundo Vbar, Fbl 5.1 pro, Scorpion 4020-910... 700E, Mikado V 5.1 Pro...yeaya

05-17-2011, 07:59 AM	#18 (permalink)
tntburnett Blade Forum Support Join Date: Feb 2009	I say it is on the way up up and away :-). Be bless __________________ Jesus Rep Its all Good,Its all GOD FPV Everything Now GOD BLESS

05-19-2011, 08:07 PM	#19 (permalink)
BaconRaygun Registered Users My HF Map location Join Date: May 2010 Location: Longuyland, NY	Finally got her all wired up and set up... now all I need is for Neu to hurry up and send me my motor before I go crazy... Looks like I have the only flybar in town. __________________ ~SAB~ Goblin 700 ~Compass~ Warp 360 ~Blade~ mCP X (BL) AMA# 977012 Team BOCA Bearings

05-21-2011, 03:26 PM	#20 (permalink)
Heechee Registered Users My HF Map location Join Date: Jun 2009	I started a flybar build as well! Unfortunately for the next two weeks I can't really work on it, so it'll fly hopefully some time in June. As for those Deans connetors.. I also have Deans on my packs, on 6S, but they spark badly enough with those voltages. I will build a Y-connector that has Deans for the packs, but it'll connect to the ESC with EC5 connectors. __________________ Two broken Trex 500 ESP helis, one unfinished Outrage Fusion 50, and one MSH mini protos in the mail.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in