Register Now

magbarn · 12-04-2011, 07:23 PM

Tried out the BeastX in my 500EFL and now want to convert my 450 also BeastX. Anyone else try mounting below the main gear like the 3GX? Any issues with wiring and vibes?

turboracer · 12-04-2011, 08:46 PM

I did. I ground the opening on the bottom plate a little larger to make it easier to program the beast. That was it. Everything else fits well.

blueprint · 12-04-2011, 09:03 PM

Never thought about mounting it there... what are the benefits? why not just mount it over the boom support? It would make programming easier no?

magbarn · 12-04-2011, 10:51 PM

Quote:

Originally Posted by blueprint

Never thought about mounting it there... what are the benefits? why not just mount it over the boom support? It would make programming easier no?

Honestly for looks and cleanliness. My 3gx is well hidden and I don't have the jumbled mess of wires hanging out the k like most 450 heli do. One other supposed benefit is it's perfectly in the center of the heli which is supposed to give better readings for the MEMs units. I also think there's less vibes there as it's not above the boom mount which picks up vibes from the torque tube.

blueprint · 12-04-2011, 11:39 PM

Thanks!

I may look into it more... im transitioning my Pro to FBL as we speak and still trying to figure out this BeastX lingo. What part of SoCal are you in?

SeanM · 12-06-2011, 02:35 PM

I chose to mount mine in this location for several reasons, but mainly for how clean it can make it. I'm also pretty sure that there are less vibes in this location when compared to the anti-rotation bracket.

12-04-2011, 07:23 PM	#1 (permalink)
magbarn Registered Users Join Date: Jul 2011	Going from 3GX to BeastX, anyone mount it under main gear? Tried out the BeastX in my 500EFL and now want to convert my 450 also BeastX. Anyone else try mounting below the main gear like the 3GX? Any issues with wiring and vibes? __________________ Blade 4503D, MCP-x, MSRx, MCX2 Dx8 Align T-rex 450 BeastX FBL T-rex 500EFL I V-bar mini T-rex 500EFL II BeastX T-rex 600EFL V-bar T-rex 700E V-Bar

12-06-2011, 02:35 PM	#6 (permalink)
SeanM Registered Users Join Date: Jan 2010	I chose to mount mine in this location for several reasons, but mainly for how clean it can make it. I'm also pretty sure that there are less vibes in this location when compared to the anti-rotation bracket. __________________ - 6S TREX 450 Pro FBL - µBeast, MKS, Castle Creations - Goblin 500 - Kontronik Pyro 600-12, Jive 100lv, iKon, BK servos - TBS Discovery - Pixhawk - Spektrum DX7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-04-2011, 08:46 PM	#2 (permalink)
turboracer Registered Users Join Date: Jan 2011	I did. I ground the opening on the bottom plate a little larger to make it easier to program the beast. That was it. Everything else fits well.

12-04-2011, 09:03 PM	#3 (permalink)
blueprint Registered Users My HF Map location Join Date: Jan 2008	Never thought about mounting it there... what are the benefits? why not just mount it over the boom support? It would make programming easier no?

12-04-2011, 11:39 PM	#5 (permalink)
blueprint Registered Users My HF Map location Join Date: Jan 2008	Thanks! I may look into it more... im transitioning my Pro to FBL as we speak and still trying to figure out this BeastX lingo. What part of SoCal are you in?

Register Now

Log-in