START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Blade 450X Blade 450X Helicopters Information and Help |
|
LinkBack | Thread Tools | Display Modes |
03-31-2013, 10:53 PM | #1 (permalink) |
Registered Users
Join Date: Feb 2013
|
First crash tail jerks right to left speraticly.
Ok after replacing the broken parts all looks good. Tried spooling up and get it into a hover then all of a sudden a quick jerk to the right then left then back right then right again. Not always in that order. Do you think I stripped a tail servo gears? How would I know? The elevator servo was stripped I know because when its powered an I turn the horn it made the sound like one of those geared hot wheels u would pull back wards and when u went to far. That sound. Anyway I bought a new servo there. But that didn't fix my jolting. Can the Ar7200BX reset or something after a crash? Any help would be appreciated
|
Sponsored Links | |||
Advertisement |
|
03-31-2013, 10:56 PM | #2 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2013
|
I bought a new set of gears for the elevator servo and another servo. Installed the new servo so can I use the new gears in the tail servo
|
04-01-2013, 04:51 AM | #3 (permalink) |
Registered Users
Join Date: Jun 2011
|
isnt the tail servo see through? run it on the bench (with throttle hold on!), move the tail to all extremes, see if you can see any missing teeth. use a magnifying glass if that helps
or, open the casing and check the gears to be sure
__________________
Mikado Logo 500 Super Combo, Blade 450x castle edge lite 50, eflite 450H, vbar neoOxy2 FE micro brain 2, mks ds480 talon 25 rest stock Hobbyking Yak12 plane, QQ Extra 300, DX8 (G1), PL8 |
Thread Tools | |
Display Modes | |
|
|